Rust-Oleum A65741 Watco Danish Oil Wood Finish for Interiors (Natural Wood Stain Color - 946 ML)

Might appear expensive but more economical in the long run. It can easily be applied by the home enthusiast without assistance and in very little time and with very little mess.It is longer lasting than french polish as the oil penetrates the wood and in fact the wood begins to appear richer with time. Add to it that you really don't have to sand, sand and sand as you need to do for french polish. A moderate amount of sanding for a smooth surface with sand paper 150 should do. Strongly recommended

Great for natural finish for wood work. But I found that I still needed to use a PU or varnish coat to protect it from the dust (given the heat and dust in India). Worked very well with Neem wood (Indian Lilac). As a first time wood Diy-er...have to make a special mention of the user friendliness of the product. None of the fuss of streaking and such... 3 coats over as many days ... perfection In picture: before sanding and oil application on right After sanding and 3 coats of Watco Danish Oil on the left.

Pores of wood absorb it to the depths, yea, you can feel it later. Just 20-30 of its easy application and you can put your wood work to use. But the best thing- it changes the refractive index of the wood. Thus the low quality wood also appears very high quality.

One of the best and easiest natural looking polishes one can buy in India. The price however has tripled since I last bought a can of Danish Oil

Works well if you follow the instructions closely with regard to the drying time between successive coats. I used it for unfinished acacia wood Provides a nice sheen and glow to the furniture without too much of a shine. One star less due to the high cost of this oil in India

I used it on pine wood. The finish was good. And it is simple to apply . It will not give you blindingly glossy finish but rather it'll maintain the natural feel of the wood. Grains are highlighted after the application

Super product, easy to apply and smells good!

Great Stuff

Good

The review says 4pkt but only one tin of oil arrived.

El uso es muy simple, sobre la madera lijada, en este caso a 320, se aplica con un paño limpio el aceite, se retira en 15 minutos y se repite una hora después, 72 hrs después puse la última capa. El color que adquiere es muy bonito y las vetas se ven profundas. En este caso además puse una capa de cera 3 días después para acentuar el brillo. En conclusión el trabajo es una fracción de lo que requiere el laqueado o la nitrocelulosa y el terminado es excelente. El único pero, el precio. Pero rinde bastante. Este baúl es de 60x40x 38 y consumió unos 120 ML en todas las manos, adentro y afuera.

I have been using watco natural Danish oil for years. It brings out the natural wood color, and hardens the wood when it drys. And as I understand it is food safe.

Excelente resultado. Cumplió mis expectativas