25Mx20mmx0.15mm Thermal Adhesive Tape

Description

Specification: Dimension: 20mm x 25m (Width x Length) Glass fiber thickness: 0.15mm Thermal Conductivity:1.5 W m k Breakdown Voltage: 5KVAC Thermal impedance : 0.3 x2103;in2 w Initial Adhesion: 1.5kg inch 180°Adhesion power: gt;18 N 25mm Applicable temperature range: 30~+150 °C Features: Thermal conductivity and high stability, its life than the general heat double sided stickers long, normal temperature (30~+150 °C ) can work for a minimum of 5 years. Notes For Attention: 1.When using thermal conductive double sided tape, keep the adhesive surface clean and dry. 2.After tearing off the heat conductive double sided tape to peel the paper, double sided thermal tape is evenly pressed with your fingers (just a little strength). 3.The viscosity of the heat conductive double sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength, That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time. 4.In the paste process, the appropriate heating (60 ~ 70 x2103;), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion, In the lower temperature of the winter, it 39;s little tips that heating to increase the viscosity of the heat conductive double sided tape when using the thermal conductive tape. Package included: 1 Roll Thermal Conductive Double sided Tape Review: AVNTKER Double Sided Thermal Tape 1inch x 66 Feet Super Strong Adhesive Non Conductive Hea - So, I cut a chunk this size> 1-3/16" x 3/4" I have a TUF GAMING Z790-PLUS WIFI D4 mother board factory heatsink they are flat aluminum very thin double sided thermal tape # (x002TZHUPX 1"x66') very thin. I put it on the bottom of the chunk I cut out. the first pic is show you where the controller is on that brand name SSD on the flat part of the factory heatsink over the controller is where you want to pull more heat out of the SSD. It still run warm it takes longer to heat up now it runs 36C at idle, and at heavy gaming it hit 40C. I drop 2C with the New Peerless Assassin 120 SE COOLER 3 fans over the Hyper 212 BLACK 2 fans before the extra Heatsink for the Controller. On a i7 12700KF 12GEN 10 fans air cooled only. (room temp 25.4C / 77F) It been on three days, two days 2hr each day game play. So far pretty happy but may have to get an aio to help cool a bit more. I hope this help some others. Review: Quality. - Worked as advertised.