Titanium Multitool Blades Extra-Long

I bought these long reach Multitool cutting blades for a specific job cutting hard wood. I have finished the job of about 30 minutes net cutting time only using one blade which is still sharp. Although I had to stop frequently to let the blade cool down as the wood was smoking badly, the heat didn't appear to effect the blade apart from some minor discolouration. The cutting edge is 44mm wide which gives a wide cut. Also, the design of the universal mounting allows the blade to be removed without having to completely undo the retaining bolt.I could have purchased the three long reach blades for £18.97 but an extra £9.00 for three more shorter blades appeared to be good value. I would buy these blades again but if they all perform as well as the first one I wont need to for some time.

Cuts through metal nails etc as advertised and proved to be a lifesaver when removing some skirting boards due to their extended reach.The blades do wear out somewhat quickly when cutting through nails etc but overall for me were well worth the extra expense.

Tried a few different brands, but, these are by far superb quality. The absolute best I’ve used. Used these to trim a solid oak floor along one side. Other brands failed immediately. These were brilliant and job done

When fresh these cut through framing nails effectively. But after only a couple of goes they had become very blunt and ineffective. They work, but you need to accept that wont last long.

The media could not be loaded.  The blade comes off from its welding joint to the multitool side

Don’t bother wasting your money these blades are totally useless. They definitely won’t cut metal I tried to cut one No4 screw and it took 2 blades my cheap faithful blades do a better job

These blades are very robust. I cut through several large diameter nails and the blade still looked brand new. I was sceptical but I am now very impressed.

These are very good for most metal and wood however, the very hard metal some screws are made of is a bit beyond their capability. Don’t get me wrong, for the vast amount of things these are excellent but for very hard metals, these blunt very quickly.My personal experience was these only handled two hard metal screws before being blunt and unusable. For softer metal such as nails / aluminium and wood, these are very good and do last.

04/02 Update:So, I've learned a great deal about these blades over the past week.#1. This product turns out to be really awesome if you use them correctly. After several YouTube videos and asking others, I have to share what I have found.#2. Don't force the blades. Lock them in at the highest speed of your tool and let the blade do the work with little pressure and a slight rocking motion. For me, I've found that about the weight of my tool is just about the perfect pressure. Pushing these blades hard in the material you're cutting will produce horrible results and damage your blades completely.#3. The long shaft blades in this set are total "money", they are awesome and work so much better than any short "standard" shaft blade. In my opinion, all of the blades for this tool should be long shaft only.#4. The seller immediately reached out to me about my original review and problems I was having with the blades I got. They want your feedback and they want to help, so that's the icing on the cake for me.#5. I tested what I learned over this weekends demo job. I was able to use one blade through the entire job. It still has teeth and is still going strong. I'm probably not supposed to use just 1 of these blades for metal and wood but I did. I cut through rusty bolts, electrical, hardwood, softwood, drywall screws, aluminum siding, rubber, plastic, you name it. I got more done this weekend than I had the previous 2 weekends and man it felt good. The greatest part was I only had to change my battery on the tool the whole time.Speaking of batteries, these blades do not work well at all on a weak battery, keep it fresh and you'll cut up everything 😉--------Original 1 Star Review:I have to admit I was so looking forward to these blades per the reviews I read. As you can see in the photos, the very first blade out is burned and teeth are gone in one spot. This blade was used on a close set group of 4 Brad nails and the blade only cut 2 of the 4 before the big burn up. Also, this blade did NOT seat well on either my Milwaukee or Dewalt but enough to use it. I wouldn't recommend these for metal or wood as they had trouble going through 1/2" plywood as well.

Urtag för stolpe skulle sågas ur karmen på glaspartiet. Inget annat verktyg funkade för det. Vanligt blad till multisåg nådde inte djupt nog - fattades 2 cm. Med dessa blad gick det galant. Karmen är aluminium och plast.

Fungerar enligt spec.

Très efficace

Habe die Klingen dafür verwendet um XPS-Platten mit enthaltenen Dübeln abzuschneiden. Ebenso kamen die Messer zum Einsatz um Löcher in Ytong zu schneiden, was ebenso super funktioniert hat. Vor allem die erhöhte Länge der Messer war sehr praktisch.