58000 BTU Inverter Air-Source Swimming Pool Heat Pump 17000 Gallon Electric Pool Heater for Above and Inground Pool Energy Save 45% WiFi App Control 220V/60Hz

Purchased this 58,000 BTU unit (after returning a unit of another Brand) for a 12,000-gal pool. Included plumbing adapters are standard pvc sizes so installation was relatively simple. The control panel is easy to use and hook up to Wi-Fi. North Florida saltwater pool application, installed late February, outside temps starting to climb into the 70's with lows in the 50's. Pool temp went from 68 degrees to 78 degrees in the first overnight 24 hrs and reached 82 by the end of the 2nd day, only daytime heating since. Nice looking unit, sturdy envelope, not too heavy so I was able to position it without assistance. Consistent delta T of 3 degrees when engaged. For a heating unit, I will highly recommend. Waiting on Summer to see how the cooling functions.

Replaced another heater which was so much power it ate my solar panels output and then some. Now with the Valpoolfaye, I still generate power while heating the pool, AC in the house running and charging our EV. I even tested the cooling and it was amazing to feel cold water coming into the 88 degree pool. Unit has exceeded my expectations. Went from two 40amp breakers to one and only use 12amps. Pool is 10,000 gal.

Let me start off by saying I am replacing a 9kw electric heater with this heat pump. While it is 220v and pulls 40amps when heating, I do get a significantly higher temperature rise and I am not required to run my pump or heater 24/7 as I can raise the pools temperature by 20 degrees in just a few hours. I installed this heat pump on an 8’ stock tank. This tank is roughly 600gallons (way below rated water capacity for this heat pump). Initially I was unable to get any temperature rise out of the heat pump so I added valves to the inlet and outlet on the heater to throttle water flow and even then I am only able to get a maximum of a 3 degree rise. The data plate states RLA as 7 amps and some change but I am reading 9-10amps. Add this with the 4-6amps of my variable speed pump running 24/7 and I am having a hard time justifying that this is a more comfortable or efficient option.

Hands down, best upgrade for standard size above ground pools. This unit was incredibly simple to wire into factory plumbing and incredibly easy to use. The 16000 btu unit took my 7k gal pool from well water temp to 80 degrees in less than 2 days (works even better with a solar cover). Customer service is incredible with this company, they respond quickly and provide detailed instructions and realistic solutions to any situation you can throw at them. I highly recommend Varpoolfaye!

Upon originally ordering our heat pump the seller notified us it was currently out of stock, however that they would contact us in a week when it would became readily available again. In less than a week they contacted me as promised and finalized my order as well as offered me a rebate for my inconvenience. We recieved the unit literally 3 days later, a week earlier than promised, so I imagine the seller shipped it FedEx Priority without the additional cost to us. We set the pump up fairly quickly, took two of us less than an hour as we had to disconnect our existing hoses from the pool that was already up and functioning. It did take us a days or two to learn how the heat pump operated and to optimize its performance. The WiFi set up took only minutes and is a great feature to allow you to control the unit from anywhere. The heat pump took our pool from 70 degrees to 85 degrees in a matter of 1 day. Temperatures outside were barely reaching 75 throughout the week. We have had the heat pump running on and off all week and are beyond thrilled, allowing more usage of the pool on cooler days. Essentially we run the heat pump and pool filter from 9 am to 6pm daily, with the programmable setting shutting heat off once the pool reaches 86 degrees. The heat pump also had a cooling function should the temperature become too warm naturally and you wish to cool the water down to a more refreshing temperature. Operation of the pump is costing us roughly $3-$5 per day, with an ambient temperatures between 70 - 80 degrees in Michigan. Lastly, I must say the customer service department has been amazing! They have stayed in communication with me throughout the whole process, verifying receipt of the unit and then checking in a week later to verify we were successful in getting the unit up and running. Our pool is 18’ Round x 52” Height and purchased the 30,000 BTU heat pump. We highly recommend doing business with this seller, I promise you won’t be disappointed!!!

Works as advertised. I am extremely happy with this unit. Heated pool from 69 to 86 in two days.

I purchased a different brand heat pump for my hottub and I had to return it because of how loud it was (its fan sounded like one of those bounce house blowers, it was obnoxious)...I was pleasantly surprised that this unit was no louder than a small window a/c unit, perhaps even quieter. The fan is basically silent, the only thing you can hear is the compressor but it seems they install a sound blanket around the compressor making the unit run as quiet as possible. The heat it outputs is beyond adequate for my ~200 gallon hottub, when not in use the unit only needs to run for 25-40 minutes every 6-7 hours! When in use, it has more than enough power to keep up even with the lid removed on the coldest of nights (for my location, high 30s-low 40s)...this is exactly what I wanted becuase the original electric heater on my hottub was very weak and the water would become luke warm quickly with the jets on cover off on those cold nights and I would need to get out. The defrost mode seems to work well, only pausing heating for a minute or two to thaw out and then going right back to heating. No doubt this unit is going to save on electricity with how well it heats and how little it needs to run to keep temp on my hottub. I have only two minor gripes. 1. The app control is hit or miss, doesnt connect unless im near the unit despite being paired to my router. But again, this is minor because I dont expect the need to monitor or control my hottub unless im there in person. 2. The default temperature differential was set at 4 degrees from factory. The manual provided gives zero info on how this can be changed. I.E. if its set to 104, it will let the water drop all the way to 100 before restarting to heat back up to 104. Reaching out to the seller, they were able walk me through a secret menu on the display to alter this setting. This secret menu seems to have a long list of different settings that can be adjusted. I asked the seller if they could provide data on what all these other settings do, and they seemed to not want to tell me... asking "what else do you need to adjust". This unit isnt cheap and I paid for and OWN IT. What I want is a list of what all the settings are on something that is now mine, it doesnt matter if I need to change anything else right now. All of these settings should have been outlined in the manual, i shouldnt have to pull teeth to find out what they are. The controller inside the unit looks like its made by some other company, so I might see if I can find more info on it that way. Deducting a star for this headache. Overall a great experience.

If you have an Intex Ultra pool, just know that nothing is going to fit correctly and Flex Glue will be your best friend because they don’t send hoses and things don’t fit. After 2 hours of trying to get connections to fit from connectors I bought, it took 2 tubes of glue to seal everything and I still can’t get the damn thing to connect to wi-fi!!!! Beyond frustrated after spending this much money

Die Wärmepumpe ist super und hat unsere Erwartungen voll erfüllt. Wir nutzen sie für einen kleinen Aufstellpool mit ca. 8.000 Litern Wasser. In nur zwei Tagen hat sie das Wasser von 12 auf 26 Grad erwärmt. Dabei läuft sie angenehm leise, was gerade im Garten wirklich positiv auffällt. Die Installation war sehr leicht und unkompliziert. Wir haben uns für einen Bypass-Anschluss entschieden, weil wir so selbst entscheiden können, ob wir nur filtern möchten oder zusätzlich mit der Wärmepumpe heizen. Insgesamt sind wir sehr zufrieden und würden die Pumpe definitiv weiterempfehlen.

This is a great unit when properly matched to the pump and pool size. It seems to be most effective at around 600 GPH, so a bypass system is recommended if your pump flows faster than that. The pool should ideally be under 5,000 gallons (based on my personal experience). Note: A solar cover that completely covers the pool is essential. My pool is just over 5,000 gallons. I needed two of these units connected in parallel with a bypass system. After three days of varying temperatures, the pool has consistently stayed at 86°F. I’m looking forward to testing the “chilling” mode during the next heat wave. The unit draws 7 amps, with a slightly higher surge when the compressor turns on. Running it on an isolated circuit is ideal. Personally, I would not run it on the same circuit as any other appliances. Customer service was great—very quick, responsive, and friendly. I had a few issues during setup and installation, and they went above and beyond to ensure I was taken care of. They even proactively offered solutions without me having to ask.

The product quality is very good, suitable for camping use

The packaging of this product is very good, and the logistics is also very fast. The pool heater is very convenient to use, and the effect of heating water is very good and fast.

Letztes Jahr schon geholt ..heute angeschlossen..läuft erstmal.. Sie funktioniert und bei eingestellten 25 Grad kommt schonmal warmes Wasser raus :).. 1 Stern Abzug wegen undichte Anschlüssen trotz 2 er Schellen!!!!!!! Muss ich erstmal schauen wie ich das dicht bekomme