Large Tilt Mount

This is a quality product, especially at this price point. I like that an optional extension rail is provided to allow spanning across 24" stud intervals - but this same extension is valuable to provide lots of extra flexibility in centering the TV on your wall even if the stud placement is nowhere near centered on the wall. The tilt mechanism is basic but functions well within a reasonable range of motion and the TV is easy to attach to the bracket. I had to shorten the two TV rails that attach to my LG TV as the back of my particular TV model is not flat at the bottom, but "flares out" to a wider base. That was easily done with a hacksaw (removed about 2" of each rail before bolting to back of TV VESA mount). The directions were reasonably well-written and easy to follow. A cardboard mounting template is also provided, along with a set of adjustment screws near the top to level out the TV left-to-right (this helps if you find your mounting bracket is not perfectly level across the wall after you bolt it in place). If you are handy with tools and doing measurements to lay things out, this is an easy install. If that is not your skillset, it may be worthwhile to have a friend who is knowledgeable help you out.

I love everything about this wall mount, including the price. Bought this for a 75" TV and was not disappointed. It is incredibly sturdy. Came with a set a large lag bolts that should be capable of holding well over 100 pounds.You also get an extension piece in case you live in an older house where the wall studs are more than 16" apart.The included HDMI cable was a nice touch as is the include level. You get a number of different size bolt, one of which is sure to fit the back of your particular TV for attaching the mount bars. I found the bolts either too long or too short, so I used the longer ones and had to use the included spacers which worked out just fine. Once the mount is attached to the wall and the mount bars are attached to your TV, just lift and clip. Very simple.Overall we were extremely happy with this purchase and even ordered a second one for my son's room. At this price you can absolutely not go wrong.

I did not realize this came in two pieces. I don't recall that being in the description, but if it was I just missed it because that's why I chose this one over another. Putting the pieces together was not as easy for the top and bottom screws they seemed to want to cross thread. I did eventually get them I and once it was together it appeared to be solid. I love that this comes with a teamplate. This helped because I have a wall socket where I was installing and my builder uses the jumbo covers so I just drew in the opening on my template and went to the big box stores for a standard size one to solve. If that had been the only issue this probably would have gotten all 5s. But when I got to installation I came to find while this package included the screws I need they were simply to long. I had enuf washers to compensate, but there is a rim on the anchor arms that would not allow the washers and screw to be flush. No way I'm mounting my TV with this issue. So after trying to make this work for 20 minutes I gave up and back to the box store for shorter screws. $5 later I have the arms installed, mount on the wall and TV up. Everything appears solid and I love all the safety features on this mount. This is not flush to my wall like some of my other mounts, but I chose it that way for ease of installing cords. I have installed a lot of mounts in other rooms of my home so I would say installation on this mount is by far my least favorite, but the safety features are subpurb. As long as it stays on the wall I'm happy.

Pros:- very slim, low profile- versatile (comes with bracket extension if needed to reach studs farther out or accommodate a wider VESA config- nice and easy design for hooking/unhooking- easy tilting- can be a single person install due to the hooking design...however depend on how cumbersome and heavy your TV is not to mention how much weight you can handle. 2 person would make life easier though (one person can help guide where you hook onto)- Hardware includes various M type screws plus wall anchorsCons:- the low profile maybe so damn close that the TV may not clear the bracket bar enough- locking/unlocking had a pull cord (not a big gripe - depends on your preferences if you care) I just loop the cord in back and it is unseen. No big deal but I mention this anyways.- may need an extra assortment of metal washers or plastic spacers due to the profile and your TVI like it but thank goodness I am a DYI fixer. I had some washer and spacer collected from years of doing this stuff and my Vizio did not clear the bracket so I used longer M8 screws with 2 more spacers between the TV and bracket and then 1 more from screw to bracket to make sure the longer screw did not damage the inner board. Otherwise, I am happy with this for the price. A general rule of thumb is always save your plastic spacers and have a good assorted box of washers (metal or plastic) in your fix it drawer. They saved me many many times for many types of projects. Not just TV wall mounts.

Very easy to install. The hardware that came with the TV wall mount was very appropriate to the mount itself. Sometimes when hardware is provided for TV mounts they don’t fit correctly or they may not secure it firmly. The instructions were very helpful in the type of TV screw holes you may have and the appropriate bolts to use to secure your TV to the rack.As most of you know it’s best to use a stud finder to know where you can use the mounting screws to secure the mounting frame so that it is strong enough to hold your TV. When using the mounting screws, make sure you drill a pilot hole first into the wall and stud so that when you use your drill to screw in the mounting screws it will go in a little easy but yet grip the wood keeping the mount tight to the wall.The quick release clips in the back make it easy to release the TV. Overall I love it.