NEW 2 HP SPL Compressor Duty Electric Motor, 3450 RPM, 56 Frame, 5/8" Shaft Diameter,120/240 VOLT

All specs on this motor were the same as the original motor. Wired up easily and operates smoothly. A local electric shop wanted $900 to rewire the old motor. This was more wallet-friendly.

Perfect fit craftsman professional horizontal compressor 25 gal? Anyways the original electric motor was bad the day I bought the compressor 9 years ago. It worked about 89% capacity would randomly cut off after running for a bit, sometimes months working correctly, I always thought it was due to the circuit I was plugged into. It worked great even with the small issue, but finally wouldn't keep running one day instantly trip thermal switch,then I hot wired it and got another few months of service. Ultimately it was the windings in the motor. But obviously try the cheap stuff first when troubleshooting, but also don't wait 9 years with something that doesn't perform to 100% capacity. Lessons were learned like get a compressor from a company that specializes in compressors and has a larger motor than this seemingly consumer grade underpowered stuff which is actually quite good, I just like to b1tch.

Perfect fit. easy install. Works great. Fixed my Air Compressor.

They sent the wing motor the first time, but quickly replaced it. The second was removed replacement and still working great.

after wiring item work with no problem.

Bought 2 of these ...put one in and worked perfect put other on other side of machine ...and faulty motor so 50 50 chance you'll get one that works

Originally, I had bought a motor made by Vevor that claimed it was 3450 RPM. Long story short, it was not, and it ran at about half the speed as the previous motor that was on the air compressor prior to it. That made me a bit skeptical to buy this one, but it ended up being a direct match. Not only was it about $60 cheaper than vevor, but wiring it in took all of one minute. (30 seconds was spent taking the back cover off). It's quiet, doesn't lag on start up, and doesn't get hot. It actually seems to work better than the motor that came with the air compressor. I wired it for 110v, so it was plug in play. The attached picture will show where I attached the wires in the back of the motor. 10/10 recommend. I almost wanna buy another for future use.

Very easy to install, shaft size and keyway and wire so simple, recommended for any one needs