7 inch LED Headlight Fog Passing Lights DOT Kit Ring Motorcycle for Harley Davidson Touring Road King Ultra Classic Electra Street Glide Tri Cvo Heritage Softail Slim Deluxe Fatboy Chrome

I bought 2 of these. One in chrome and one in black. The chrome one is for my wife's 2014 Fat Boy Lo and the black one is for my 2015 Street Glide Special. Installation was very easy. I do recommend checking headlight alignment after installation. Look of You Tube for videos on how to do this or have your mechanic do it for you. I installed right before an evening ride and it was tough seeing to get home after dark due to the light being aimed way too low allowing me to only really see about 10' in front of me. I was in a hurry to ride to the Harley shop before they closed and forgot about alignment of the headlight. I can't speak about longevity, but fit and function are quite nice. Neither of our bike use the running light and it would have been nice to have the option to save some money and only buy what I needed, but the cost still seem worth it. Very bright light. These lights have more lumens than the Daymaker or some of the other headlight options too. At this point, I'd recommend and buy again. This next comment is to speak about customer service. I did have an issue with low and high beam not working properly at first. I had also installed an LED, front daytime running, turn signal kit from Custom Dynamics out of NC. This kit runs through the ECM and needs to be synced. I followed their syncing procedure and all seemed fine with the CD LED light kit, BUT It did not sync correctly to allow for proper function of the high and low beams of the headlight. I checked and it seemed like the harness connection that came in the headlight kit was defective. I called customer service and within 5 minutes they sent me a new harness, no problem. As it turns out the headlight was fine after I re-synced the ECM after the headlight installation. Apparently since I installed the DTR, turn signal kit first and synced it prior to installing the headlight, the ECM didn't recognize the new LED headlight properly. This issue was in no way a defect of the headlight, but it allowed me to experience the excellent customer service of this company. I'd recommend and buy again.

Replaced the stock lights on my Harley Davidson and noted a world of difference! Beam is brighter, longer and wider than stock. Highly recommend!

This was very easy to install. I would rate the skill level required as "minimal" skills. Be able to use a screwdriver and maybe a pair of pliers if you have to use the pigtail/adapter. My light came already mounted to the ring so it took me about 5-10 mins to pull my old one out, pop the new one in and be ready to ride. The light is very bright and was leveled right out of the box. The passing lamps are a cinch to install as well.

Update April 27, '21: Since I've installed the Headlight Kit I've only rode about 500 miles on this bike, and only twice at night. Last night illumination was "shaking and flashing" when I started the bike. Turns out the right side passing/fog lamp has one of the LED's wobbling around in the housing. With the engine off I tapped on the lamp housing and I can see the LED inside shaking. This is not good. I have to downgrade my rating to three stars.Pro's: Looks great, has mega illuminationCon's: Headlight connector prongs were too long to seat plug with original wiring connector on bike. Had to cut off the original and replace the socket on the bike.On most HD's you will have to fabricate something for the outer trim ring to clamp onto. As shipped the mounting hardware for the headlamp is too thin so I had to make some small "L" brackets to clamp behind the mounting ring so the trim ring has something to clamp to. It took a while to come up with this solution.

Excellent product!! Install could not be easier, only took about 20min. Comes with all wiring and harnesses needed. I’ve got an 07 Electra glide ultra classic and it was a direct fit. No modifying needed. Really surprised I didn’t even need to adjust the center light at all. My only concern is the light is such a direct beam it limits you on what you can see while turning. Other than that great product!! Also have a radio and it doesn’t mess with that whatsoever. Good buy for the price!

I installed the Truckmall LED lights in my 2004 Heritage Softail. Install was pretty easy. Everything needed was included. Main headlight was plug and play. Super straight forward. Auxilliary lights required me to cut wires, then splice with wire connectors, which were included in the kit. Not too hard, but did require a bit of work. I can't complain. They are super bright, very happy for safety purposes and also for vision at night. The visual look when they are not turned on is not as classic, but I will get used to it. All in all, very good light set and great value for the money.

Driving lights needed to be wired on my 2003 roadking , U need to use the ring supplied on older bikes because the old ring is too shallow to fit , and you’ll need washers for the install because the mounting holes are too big for the original screws , all in all , this was a pretty easy install , and the lights are incredible, there so bright that they light up signs and you can see them in the daylight ,

I avoided modifying my lights because I know what a pain it is to put new parts on an old bike. I was even considering a new bike and giving mine to my Son. These lights fit PERFECTLY! No fuss! No modifications at all! The kit even came with adapters for different models (which I didn't need). The only thing I had to change was cutting off the plugs from the spot lights and wiring them direct to my existing wires. The kit even included butt connectors for that! GREAT PRODUCT!!! Fast shipping, VERY FAIR PRICE, EXTREMELY EASY TO INSTALL! Sorry Son, Lolz, I'm keepin it! I will look into this company for new tail light and blinkers! Thank you Truckmall, AWESOME PRODUCT....Lolz, 58 years old and getting excited about my Harley again!!!