LXDTOOL PDR Dent Puller Suction Cup Tools Kit For Car Rubber Hammer Hail Tools Set [Energy Class A]

Description

how to use:1. Clean the damaged surface with a clean, damp cloth2. Stick the glue stick to the spray gun, connect the power supply and warm up for 5-10 minutes.3. Trigger and apply the appropriate drawing pad with the extruded glue. The 4 holes of the washer should be coated with hot melt adhesive. Note: The larger the wire washer, the greater the tensile force.4. Immediately place the brush pad with hot melt adhesive in the center of the dent and keep it until it sticks (let the glue cool for about 5-8 minutes. Cooling time should be less than 10 minutes, winter should be slightly shorter)5. Align the T-shaped repairer and press the wire drawing pad with hot melt adhesive, and pull the slide bar backward to pull out the dent.   Bridge groove puller: Install the washer on the bridge groove puller. Then install the nut and slowly tighten the nut and you will see the dent disappear gradually until the original shape is restored.6. When removing the dent, use a plastic shovel to remove the glue with alcohol.7. If the dent still exists, tap it gently with a flattened hammer with a smashing head8. Repeat the above steps until the dent is repaired