LINKUP Cat6A RJ45 Connectors | 100-Pack, Gold

Very easy to install and the performance is great. They are built well.

I bought these because we have some CAT6 cable that is 22AWG and the connectors we normally use would not work. The wire was too big and was extremely difficult to get into the connector. All other connectors I have looked at would only handle 23AWG wire. I finally found these and once I got them in, I have found that they work VERY well with our 22AWG CAT6 cable. We bought the smallest package we could to test them out, but since then I have bought a couple more large packages of them to keep on hand. They definitely work great and make the job easier.

These are good ends. But, seem to have issues with 3 different brands of rj45 pass through crimping tools, that we have to go trim the ends.

I was doing multiple runs of CAT6 and CAT6E underground cabling for my PoE cameras. However, I could not find any connectors that would fit this massive cable. It is about 75% larger than standard CAT6, a pretty big difference. These connectors, however, worked flawlessly, fitting the large diameter in with no problem.

Three prongs on gold connectors are not offset wide enough (if they are offset at all, as to my eye they are not) to squeeze 22/23 AWG solid core between them - they simply slide one side or the other. They do end up making contact because they touch the side of the core, but I wouldn't trust it 802.3bt PoE at 100W. It was also my first experience with load bars and they do simplify the process a lot, so your wires enter the pathways in the jack almost perfectly straight all the time, but apparently it doesn't help much with proper connection... I do allow that you may get one prong out of 50 connectors that will actually wrap around the core as it should, but I only did one cable with these so far, so it's 8x2=16 wires and none actually engaged properly with the solid cores from the looks of it.

The best RJ45 connectors I've used and the only ones that fit with ease on heavier 23awg monoprice cat6a cabling.

These actually do fit the much thicker cat-8 cables (22awg). I only wish they made a pass-through version.

Not the easiest connector to us but it's the only one that will work with the shielded CAT 6 cable.

These RJ45 are good. I only had a couple of them which didn't work for me, more likely because I messed up during the crimp process. Please keep in mind that you cannot use the same crimper type as the one for CAT5 or CAT5E RJ45s plugs. You need to use something like the "[LINKUP] CAT6A RJ45 Crimper for Larger Diameter Connector | Hand Tool Cutter Stripper | RJ11 RJ12 | Comfortable and Compatible" available here on Amazon.ca I just wish these RJ45 were pass-through as it would make life much easier. They come with load bars, which helps, but a pass through would be ever better. I also wish they had how-to instructions available for these, like they have for the [LINKUP] 6 Pack - Cat6A RJ45 10G Shielded Die-Cast Metal Field Termination Plug. Unfortunately I had to figure out on my own and lost a couple of connectors in the process as I had the load bar inserted backward in my first tries.

CAT 6 A LAN over 2 houses & a workshop , for a combined Fritzbox system operating on Fibre in --ethernet out

Pésimos conectores he desperdiciado 20 para que queden bien 8, las terminales no se alinean a los cables y queda de lado lo que hace que no haga contacto o tenga falso

Seems cheap, no markings anywhere for color scheme to line up the wires. A quick reference would be nice. It does not come with the boots, maybe they should put it in the title, or in the first couple lines in the description. Not the last line in vague language.

Il n'est pas aussi facile d'utilisation. Avoir un vidéo de la compagnie qui nous démontre comment utiliser le "loadbar" serait un avantage.