eSUNPLA+ Filament 1.75mm, Enhanced Toughness 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Pine Green

With the purchase of a new printer (BambuLabs X1Carbon) I have been going through my stock of filament at a rapid rate. Fortunately for me a sale day popped up and had a range of eSun filaments at reduced prices. eSun PETG is one of my favourites so I thought I would try PLA+ for the first time.First things first - it comes very securely packaged in a proper cardboard box, within which the roll is in a thick vacuum sealed plastic bag complete with dissicant. You also get a nicely printed booklet showing the range of filaments and the associated temperatures for optimal performance, which is a nice touch. Quite often the manufacturer just leaves you to do some trial and error.As an aside to anyone considering the X1 or X1Carbon or already owns it - this filament fits into the AMS unit perfectly without fouling the lid or running off-center. The only thing missing is an NFC chip so the unit recognises it automatically!It's pretty forgiving stuff, I used the default settings for PLA which were actually a little low on the temperature side, but it printed quite happily without getting grumpy and causing me any problems. I did up the temperature to the suggested settings after the initial print and it has continued to print well. I have had no issues at all with adhesion on the Bambu flex plate with any filament, this filament included. From my experience, the way this prints I don't imagine anyone else would have any issues either.This filament is definitely worth 5 stars in my opinion, the fact it was on sale and cost less than unbranded mystery filament usually does was the icing on the cake and I wouldn't hesitate to buy it again.

I simply wanted something more authentic for printing figurines, skulls, etc. and gave this a try since it's available in "bone white". It fills the brief perfectly. There's nothing particularly special to it, it just works. Had no printing issues with it at all beyond some stringing on particularly big prints but that's probably my fault. Spools well wound as well.

This black filament is top-notch. The colour is deep and consistent, giving all my prints a sleek, professional look. It feeds smoothly through my printer with no jams or issues. The quality is spot on, making it perfect for all my detailed projects. Highly recommend for anyone looking for reliable and affordable filament

I've been using eSun PLA+ since I began 3D printing in May. I went through 9 x 1kg spools (1 silver, 2 purple, 1 cold white, 4 black and 1 grey) without any problems. The next spool (grey) was stringing like mad, no matter what temperature and retraction settings I used. I switched to a spool of purple and had no issues, so it wasn't something wrong with my printer.So, after chatting online with some more experienced printers, I bought a filament dryer. I weighed what was left of the grey spool (approx 900g including the spool) before putting it in - after 4 hours I took it out and weighed it again - it was 4 g lighter. That told me that the stringing problems I'd been having were down to excessive moisture in the filament.Once the purple roll was finished I put the now dried grey roll back on and it printed fine until near the end (probably about 150-200g of filament remaining) where I found it was a bit tangled - actually, I realised what was happening because it almost jerked the spool and roller off the shelf above the printer. Luckily I caught it before it wrecked a print, not to mention the printer. I shifted the spool onto the normal frame-mounted spool holder.At that point I went to put the next roll of grey into the filament dryer and saw that it was really badly wound. I spent several hours winding it onto an empty spool, then back onto the original spool. It was quite clear to me that it had been very badly rewound onto the spool it had come on - the filament was twisted and in many points looked to be stressed. I then dried it for 4 hours, leaving it in the drier until the roll on the printer finished. It started printing OK, but then there was some stringing again - I think it probably needed more than 4 hours in the drier. Yesterday I switched over to a roll of purple. It looked to be much better wound...right up until it got about 3 layers down where the filament started to get stuck under what should have been lower layers.Interestingly, all three spools I've had problems with were ordered during September. I suspect that there must have been a major issue at their plant a few months ago for their quality control to have slipped so badly.I'm reluctant to change brands as up until these three spools I've had a great experience with the eSun PLA+ - zero clogs, great print quality, good layer adhesion. However, I do have some Sunlu PLA+ to try.

Perfect filament no issues with printing very durable and very consistent, has some small flexibility

Every single 3d filament i used from from eSUN, i only have good things to say, print really well, does not retain moisture ( that much) sticks to the build plate, nice layer bonding!perfect product for hobbies and playing around, nice color accuracy as well.I really recommend and will keep buying.

Took a little bit of time to get the settings right on my printer but once sorted good quality prints.

Bra pla+ filament

Ho testato questo filamento PLA+ di eSun sulla mia Bambu Lab A1 Mini e sono rimasto davvero impressionato dai risultati.PRO:- Compatibilità perfetta con il profilo preimpostato eSun PLA+ della Bambu Lab- Stampa fluida e costante, senza intoppi- Finitura superficiale eccellente- Colore verde intenso e brillante (leggermente scuro ma molto vivace)- Ottima adesione tra i layer- Dettagli precisi e ben definitiHo stampato il modello di test Bambu Lab che evidenzia varie caratteristiche tecniche del filamento, e il risultato è stato impeccabile. Il filamento ha gestito perfettamente tutti gli elementi del test, dai piccoli dettagli alle superfici più ampie.Il verde ha una tonalità particolare: è abbastanza scuro ma mantiene una brillantezza che dà carattere agli oggetti stampati. La finitura è uniforme e piacevole alla vista.La qualità costruttiva di eSun si conferma ancora una volta di alto livello, confermando la reputazione del brand nel settore della stampa 3D.Consigliato per chi cerca un filamento affidabile con un ottimo rapporto qualità-prezzo."​​​​​​​​​​​​​​​

Sites zijn altijd voorbarig over hoe een product is. Wel, het is goed aangekomen, dat dan weer wel.Het gebruik laat nog even op zich wachten maar komt eraan.Dus over de geleverde kwaliteit kan ik alleen het verleden aanhalen: was goed, geen klachten, maar....je weet resultaten behaald in het verleden zijn geen garantie voor de toekomst.Tot zover, dus.Bert

esneklik anlamında baskı kalitesi ve baskı kolaylığı anlamında. her anlamda kullandığım en iyi flament. başka markalarla yaptığım baskılarda özellikle birleşim ve hareketli parçalarda kırılma yaşarken esun pla+ da sorun yaşamıyorum.Flamentı takıyorum bitene kadar arkamı dönüp bakmıyorum. Bitincede yenisini takıp yoluma devam ediyorum.Yalnız görseldeki gibi plastik kasada değil. Ahşap kasada geliyor bilginiz olsun.

esneklik anlamında baskı kalitesi ve baskı kolaylığı anlamında. her anlamda kullandığım en iyi flament. başka markalarla yaptığım baskılarda özellikle birleşim ve hareketli parçalarda kırılma yaşarken esun pla+ da sorun yaşamıyorum.Flamentı takıyorum bitene kadar arkamı dönüp bakmıyorum. Bitincede yenisini takıp yoluma devam ediyorum.Yalnız görseldeki gibi plastik kasada değil. Ahşap kasada geliyor bilginiz olsun.