BTF-LIGHTING RGBW RGB+Natural White SK6812 (Similar WS2812B) 4 Colors in 1 LED Strip Individually Addressable 16.4ft 60Pixel/m 300LED UL Listed IP30 DC5V White PCB (No Adapter or Controller)

This was my very first DIY LED project, and these SK6812 strips made it a great experience. I used them behind my Samsung S89C TV for a HyperHDR and WLED ambient lighting system, and the results are amazing. The brightness is incredible, and the colors look fantastic, especially with the dedicated natural white channel. As a beginner, I really loved that they came with pre-attached electrical leads, which made wiring everything up so much easier for great connectivity. The strip feels well-made and durable, and the built-in backing tape offered excellent adhesion to the back of the TV. Overall, it's an absolute ease of use experience and a fantastic value for money. Highly recommend!

Awesome lights when with WLED controller.

These work great as under cabinet lighting. The fact that they're individually addressable is a huge plus. I connected to an external power supply and connected it with wled running on an esp32. Some tips: Don't burn down your house. Use more red wire than less. Calculate the max amperage a section can draw and make sure your wire gauge is rated for that. Also install fuses that will blow before your wires melt. Also, solder your wires to led strip connectors. That way you never solder to the strip, if a connection breaks you're changing/repairing a small piece and not having to take down the whole strip.

Wow, these things are amazing! Extremely easy to get running with a controller and a power supply. The light quality is great. The colors are vivid and the whites are stunning. I haven't checked for flicker yet, but Im not worried, these are great. For the money, you can't beat these; great value.

Perfect, this is my 8th unit I bought so far

Good as always just pricey

One by one, LEDs start to fail and flicker constantly. Very frustrating to use these LEDs and once one single LED goes bad everything afterwards will also flicker. Customer service was very slow to respond. Update: Manufacturer offered to send another replacement LED string, so now waiting to test it. I will update again of there are any problems.

I am 100% happy and impressed with these lights. Colors and brightness are great. The only negative is the adhesive. When I peeled the blue backing off the strip it seems the adhesive stays on the backing instead of the LED strip. I cleaned the back side of my TV with rubbing alcohol and let it dry completely. The blue backing stuck great. The LED strip… not so much. I got a roll of 3M 1/4” double sided tape and got them installed. The lights themselves are great. I will buy more for my next project.

These are very good RGBW LEDs. The value of the embedded white LED cannot be overstated as it vastly improves the light quality when set to a white. They are individually adressable making them very attractive, although they are very power hungry. Would recomend for anyone wanting good quality LEDs.

Habe noch nicht alle 300 LEDs überprüft, aber von den ersten 30 ist schon mal eines (ungefähr das 20.) defekt. Leuchtet rot, wenn es aus sein sollte. Immerhin kann man ja einzelne LEDs rausschneiden und ersetzen, aber da ich aus den 300 LEDs 10 Streifen a 30 LEDs machen will, und so keins übrig ist, werde ich wohl noch einen Meter zur Reserve kaufen müssen. Aber sonst ist so ein Streifen mit individuell programmierbaren Pixeln schon eine tolle Sache! Berichtigung: der Fehler trat bei Ansteuerung durch einen ESP32 auf. Habe jetzt den Streifen mal durch ein Steuergerät (SP105E BTF-LIGHTING SP105E Bluetooth LED Steuerpult für WS2812B WS2811 SK6812 APA102C IC LED Streifen Streifen-Licht durch IOS / Android APP Wireless Controller DC5-24V Individually Programmable ) angesteuert, und damit sind alle LEDs ok! Ich verstehe zwar nicht, wie die Ansteuerung einen Pixel am hinteren Ende verfälschen kann, aber da muss ich wohl noch was mit Vorwiderstand in der Datenleitung und Elko zwischen Vcc und Gnd unternehmen. Habe von 3 auf 5 Punkte erhöht.

Les couleurs son bonne, la bande led de bonne qualité générale le hic est la bande collante qui ne tient pas, du scotch multiface est vraiment nécessaire pour que cela tienne.

Ho verificato più volte il collegamento, ho utilizzato tutto il materiale raccomandato e venduto dallo stesso venditore, e nonostante tutto la luminosità è diversa e non si riesce ad ottenere la stessa intensità di colore su tutta la lunghezza della strip. L'adesivo posteriore è del tutto inutile perché non resta attaccato al profilo di alluminio che lo contiene. Non lo consiglio.

Update 2: Het werkt toch wel! Je moet connecten met de Gledopto controller en daar in de portal het aantal LEDs invoeren van je strip. Alle leds werken nu. ---- Update 1 Tegen beter weten in toch deze ledstrip besteld. Ondanks dat een aantal reviews aangaven dat ze een defecte ledstrip hadden ontvangen of dat alleen de eerste 50 leds werkten hoopte ik dat fit mij niet zou overkomen... maar helaas het was wishful thinking! Ook bij mij werkten alleen de eerste paar LEDs. Ledstrip gaat retour.