REXBETI Laminate Wood Flooring Installation Kit, LVP/Vinyl Flooring Tools | Double-faced Mallet/Steel Pull Bar/Tapping Block with Handle/40 Spacers, Laminate Flooring/Vinyl Plank Flooring Installation

There are a lot of these sets but I settled on this one for the reviews, price, and amount of spacers. Even with the amount they give you, you will want more spacers. But that's not a fault of this product as it already has a lot more than the comparable products. This set has a two-sided mallet - I found the yellow metal side ideal for hammering boards on the long groove side together and the rubber ideal for hammering boards on the short end into each other. The spacers are in two pieces like a wedge and you do have to put two of them together to get the proper edge spacing you need for installing a laminate floor like Pergo. This set also comes with a small pry bar with a long and short edge. This worked great when reaching the end of the row to seat all the floor boards into each other tightly. Just slip the shorter edge against the wall on either side and hammer it from both sides to ensure they are connected. The tapping block worked amazingly well but you do have to be careful that the block is always flat on the floor so the groove of your plank is within the groove on the block so as not to damage it. A few times I caught it not seated which caused me to break the groove on a board and render it unusable. I would recommend you have a weightier mallet to use for hammering boards down to lock them in place however, as I feel like trying to do that with this mallet would be near impossible. As far as durability - I had no problems with the mallet coming apart as some reviews mentioned. At the end of the project, flooring a 300 sq. ft. room, at maybe about 5'x5' or so left, the tapping block was really significantly damaged but still looked like it would survive for another project. There is a sticker with the company name on it which had come off almost completely, and there were some serious bending and dents in the side where I was hammering it from, but the groove edge was fine. Overall a set like this is a necessity for installing laminate flooring. I think this set was high quality for not being high price. I wish it came with more spacers but like I mentioned the amount it comes with is already more than most of the others do. Thank you for a great product!

Gets the job done. Good for the price

Handle kept popping off first day of use...I gave up and just use it as a block with no handle...overall, for the price, everything is just fine. Mallot is a bit on the light side which isn't ideal. Once again, for the price and amount of items received, it's just fine though

Perfect for what we needed. No issues whatsoever. Floor installed and looking great. Having the proper tools always makes the job easier.

This is a nice set to have when installing LVT or other vinyl/laminate flooring. The set includes 40 spacers, Double-Faced Mallet, Pull Bar and Tapping Block. The Pull Bar (shown upside down) has two soft pads on the BOTTOM side to prevent scratching when tapping to pull the two sections of LVT together. The short side is placed against the LVT and the long end is where you lightly tap the bar with the rubber end of the mallet to close up the section. The Tapping Block has a feature I totally recommend and that is a flat side and a slotted side. The slotted side fits nicely against the LVT plank to help prevent damage as you are tapping the sections together. The handle as well, makes it easy to slide AND hold the block in place as you are tightening up the sections. You might think 40 spacers are over kill but you would be surprised just how many you need as you are installing a run. There are many types of installation kits out there and if you are in the business of installing flooring you might want to consider a different kit but for me, this kit was just right for my needs.

It works as intended for 500 sqft but be careful on cheaper lvp as this tool will not hold up against use. It would have been adequate on the super easy higher end material I have worked with in the last couple years. It only lasted about 500 sqft of installed low cost lvp from costco and left damage on the boards (though the boards were a pain to sink together which isnt the fault of the tool.) I did not return it because I felt like we had to be hard on the tool due to the cheaper lvp fittings and all the pieces fell apart. The orange handle block tapper tool chipped. ☹️ The mallet head fell off. ☹️ The bar completely bent over and died where you use the mallet. ☹️ The orange slice wedges worked great. 5/5 stars ⭐️

What an incredible investment for the DIY'r. This made my flooring job so much easier. I recommend these tools to anyone preparing to put down the click/snap plank flooring. No matter the size of job, you'll be to glad you have them.

The REXBETI 43-Piece Laminate Wood Flooring Installation Kit is a must-have for anyone embarking on a DIY flooring project. This comprehensive kit includes all the essential tools needed to ensure a smooth and professional installation process. One of the standout features is the inclusion of extra wedges, which came in extremely handy for leveling my toolboxes, especially since my garage floor isn't perfectly level. This versatility adds significant value to the kit, making it useful for various tasks beyond just flooring installation. The quality of the tools is impressive, providing durability and reliability throughout the project. For anyone looking to tackle laminate wood flooring installation on their own, I highly recommend the REXBETI kit. It’s a smart investment that will make your DIY endeavors much more manageable and successful. 🛠️🏠🔨

Muy completo excelente compra

This set brings exactly what you need for DIY floor laying. The hammer has a hard size for moving the boards, and a softer side for hammering on top of the laminate. The extra items make this set super complete. The orange block has different sides for all practicalities