TireJect Automotive 2-in-1 Tire Repair Kit

TireJECT is a surprisingly thin fluid that supposedly contains fibers that must help stop up holes. Frankly I'm still confused as to how this stuff can plug a leak, but apparently it does. Tons of reviews say so. I say apparently because the product did not completely stop a slow leak in my tire, but that's OK. I knew it likely wouldn't. I'll have to replace the tire unfortunately. I had a garage install four nearly-new tires on my car. After installing, a heavy leak was discovered in one of them. They took the tire off again and found a small tear near the rim/bead of the sidewall. Since the tear would be flat against the rim, they suggested to let them try and repair it with tire patch adhesive and lots of bead sealer. They were confident, so I went for it. It seemed to work, but it went flat a few days later. TireJECT seemed like the perfect solution to the slow leak since I wouldn't have to disturb the repair. I bought the kind without the syringe and regretted it immediately upon trying to use it. First, the valve stem removal tool broke as it loosened it. I had to buy a new tool down the road. When I went to inject, I squeezed as hard as I could but it just wouldn't flow past the TPM. It also kept leaking out of the flex joint of the nozzle. I had a huge syringe on hand, so I sucked up the rest from the bag, ziptied the hose on both ends and got the rest of the product into the tire. HURRAY! The tire pressure had fallen considerably by the next morning. BOOOoo. I contacted TireJECT, and after several emails (and long waits in between). They determined their product was not suitable for my use case. They refunded what I paid without me even asking. I really appreciated that. That said, before injecting, the tire would go flat overnight. So, TireJECT does work to a good degree. I'm half tempted to overdose the tire with another package. Give TireJECT a try! Though, be sure your situation matches their criteria. If you have a TPM, opt for the package that comes with a syringe. You will need it. Also, throw the cast pot metal, tire stem tool out and get a decent machined one before you do the repair. Thank me later.

Third time using TireJect on a vehicle, and it's worked perfectly each time. First was the off-road formula for leaking motorcycle tire beads.... then this formula my light SUV with a slow leak until I could get the tire replaced. This was for a stubborn tire that had a leak SOMEWHERE, and usually would lose 10-15 psi overnight after a fill-up. Two days later, still fully inflated and no signs of trouble. This is great because this formulation is also okay for tire pressure sensors. Will continue to purchase this product for similar issues going forward. High quality, durability, and easy to use.

Worked well to stop a small nail puncture causing a slow leak. Has held for several weeks now. Recommended

Had a persistent bead seal leak on a very stiff walled motorcycle tire that had bead sealant applied. Losing 4-5 psi/day. Before removing wheel again decided to try TireJect. It was pretty straightforward to apply though it does tend to congeal during the install and then can leak around the tubing under pressure. Clearing cap with a paper clip solved it. Went for a ride and tire pressure has decreased ~ 4 psi in 8 days which I feel is a win for this application. Purchased the compact tire packet. It would be more cost-effective to buy a larger size and split into two aliquots, for smaller tires. All in all appears to work as advertised and of course if tire incurs a tread puncture it should be ok.

Woke up to a flat tire. Apparently I had run over a nail somewhere along the small streets on my way to work the day before. Luckily for me the type of puncture I had fell well within the specs for tireject. It's listed on the product. Right in the middle of the tread I had a nail. It took me less than 25 minutes to repair. Only extra tools you would need are needle nose pliers and an air compressor. (Don't forget to turn the tube upright to release the fluid and shake well before ) NOTE: I am getting new tires at the end of the month due to low tread. Any longer and I also would risk the hole shrinking during the winter and breaking the seal. I do not recommend this product working in a climate less than 32 degrees farenheit. 50-60 to be safer

I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.

THIS CRAP DOESN'T WORK! I removed the schrader valve and attached the bag. The stuff would not go into the tire. I squeezed the bag and nothing. Squeezed harder and the hose blew off & spewed this crap all over the tire, rim & me. I tried to reinflate the tire but the air would not go in even at 140psi. I had to remove the tire and took it to a tire store. The valve was completely blocked. They had to replace the valve and patch the minor leak I had. It cost me a ton of my time and $60 for this.

Going back to the prior tire I've had a rim that has a slow leak. 1-2 pounds a week. Annoying but easy to top off every few weeks. But we had a cold (for Florida) snap right before Thanksgiving and all of the sudden the tire was losing 1-2 pounds a day, then a little more, then 5+ and needing to top off every morning. So I figured I finally needed to do something. This was $22 - worth a shot. I can't vouch for durability, but it's been about 6 weeks and another (Florida) cold snap and it's been great. Tire hasn't needed any air. The process to add it to the tire is easy. So far it's holding up well. Definite success.

easy to use, deflate the tyre, squeeze the stuff in, pump up the tire, no more leakage. eeez as

3 garages couldn’t cure the tire rim leak , 15 minutes with this sorted it, really good stuff

Was losing up to 20psi a day from bead seal leak, 3 weeks after using this product zero psi lost

A little pricey but worked like a charm. Easy to use.

My wife had a slow leak for the past few want some one of her tires and got tired of adding air every 4 days and didn't have time to take the car to the tire store I thought I'd try this I thought it was her valve or the beads but it turned out she had a screw in there after I took the tire off pulled the screw out which was probably 1/8 of an inch diameter let the air out of the tire while it was on the jack proceeded to insert the fluid, he's my air compressor to put 10 lb in and then hit the gas station to fill the tire right up and go around for 10 minutes and the tire pressure seems to be holding like the Mansion when I pull the screw out I can hear hissing so the fact that I don't hear any hissing in the tire pressure seems to be holding I recommend this product I'm very happy with it try it out make sure you're diagnose a problem first and it's not larger than a quarter of an inch too big of a tire and the order too little of the fluid our tires were little larger on the width and what the product recommended they're still worked for midsize car the smallest bag 4 oz 17-in tires 215 55 17 size of the tires