Atrend 6.5DVME BBox Series 6.5"" Dual Shallow Hyper Vented Enclosure, Black (ATR65DVME)

So build fit and finishes are good high qualityArrived too late Cant install it by the scheduled timeAnd if you have long-back subs that can't fit without spacers that's all

The cut outs are to small , I also put a set of CT sounds Tropo 6.5” subs and the sound output is absolutely amazing for the size of speakers and box. I’ve built Stereo speaker box enclosures before not a big deal to trim the holes. The depth is just fine and it fits under this backseat of my F150 -6.5 inch subs. On 700 Watts in this box. Just playing rock. Don’t be hesitant to buy the box. The terminal cup is cheap, but it works fine.

Just received the dual 6.5" ported box. Pulled out the enclosure and attempted to stuff my Skar EVL-65's into it, only to find the wiring terminals will just barely fit through the opening (it was so tight I was worried I would rip one of the terminal blocks off the sub frame). The magnet bumper is a tight squeeze as well. Got past all those obstructions, and the opening is not large enough for the listed (and confirmed) EVL-65 diameter of 5.83". I measured the remaining cutout at a diameter of 5.575". So I am going to have to remove .255" from the diameter of both holes just to barely squeak the EVL-65's in. Not a huge deal, but if you have ever tried to cleanly open up a hole in MDF you know it's not an easy thing either. I'm not going to take a jigsaw to it as that introduces a pretty big variable for cutting out too much. So much for a drop in install. Is it possible...? Yes. But I guess I know what I am doing for the rest of the afternoon. You get what you pay for. All other dimensions are as listed (I measured install depth at 5.150").Also, the description claims "Pro Tuned 6.5” Dual Vented (divided air space) subwoofer enclosure". This box does not have divided airspace, nor dual vents. It is one large cavity that both subs mount into, with one port that extends along two walls. Again, not a big deal... but not what was advertised. The last picture clearly shows the internals of the enclosure but the written description is misleading.The terminal cup is a cheap chinese plastic piece that will need to be sealed with some silicone (if you want it to seal - this IS a ported box). The terminals have good pressure on them and should work nice with bare wire or ferrules. The inside terminals are very thin male spade strips that I am not going to use. I plan on removing the strips from the threaded terminals and ring terminals captured by the nut and washer, and soldered on to the wires (which you/I will need to supply - no wires were included with this). Several other reviews state that the seams are not sealed and will leak. After inspecting the interior of my enclosure all joints appear to be well mated and sealed with glue. This is a ported box - there should be minimal air leakage at the joints anyway.Cons:Sub cutouts are smaller than advertised: 5.85" adv, 5.575" actual. Check your subs!No internal wire includedCheap, unsealed terminal cupNot dual vented/separate arispace as advertisedPros:Seems very sturdyJoints are well sealedCarpet looks very nice - seam on the bottom and no gapsExternal terminals seem to be decentAll advertised dimensions (other than sub cutouts) were as claimed

So it says for 6.5 maybe the skars 6.5 might be wider or something but I had to shave the wood more out to make it fit snug other then that it works as intended and fits In small places

Not cut to fit my 6.5" sundown audio sa subs about .5" too small

The subwoofer cutout dimensions were to small. They holes measured 5.5 inches and not as advertised. I had to modify the box and cut the holes a quarter inch bigger with a router. Nice build quality besides the cutouts. Both my Skar 6.5 sound excellent in the box. Would have been 5 stars if not for issues presented.

The media could not be loaded. Good design

This product along with other boxes from this same manufacturer cutout measurements are misleading.This item does not fit a 6.5 inch speaker, don't waste your time..