UP Ink Cartridge Replacement for HP 21 22 60XL 61XL 62XL 63XL 64XL 65XL 92XL 94XL 901XL 56XL 57XL 58XL 650XL 652XL for HP 61XL

I really like it! Had to adjust after I took the picture, and now raised the tanks so the bottom is even with the top of the cartridges. For me it does not leak and it seems to pull the ink in better. I waited to leave the review until I could see the ink levels change!The most helpful things for me were some instructions from BCH ink for modifying the carts and understanding them more (I like their ink a lot so far too) and a youtube sublimation printing artist Dynamite Gorilla for installing tanks on my exact model of printer. His videos are for sublimation conversion but it works fine for normal ink (I wanted normal ink!) too!The only problem I had was that my carts were too tall. So I took an xacto and cut some of the top plastic off around the plug hole to make it go further down. And I used a file to scrape off some of the left side of the printer right above the plugs. NOT enough to go into the printer's brains! If you do this kind of thing, be careful! like 1 mm combined. But before that it would just ram the carts real hard into the edge and beep. Now it works perfectly.Maybe getting the right specific model kit would eliminate that problem, but this kit is one of the better looking ones and I'd rather do a tiny mod in order to have a nice looking ink tank.ALSO! you might have to mod the printer's firmware! (Inkchip, I think) but maybe there's a physical reset chip out now. I think there is! But I've already done the firmware mod!Really good kit if you have a reasonable idea of what you'll have to do! Also the included hand drill thing was very nice & sharp and made some nice holes! the tubes and elbow joints and plugs are holding up really well too. A well done kit and I'm glad it's working! :)(Did also manage to get ink all over myself!)

It took me a long time to make the adaptation, but it works well. It's a very good option.

Bought this for an HP Envy 4512. The ink cartridge carrier tabs will not close. The refill clips snapped on use. Ink poured out of the colored cartridge into the system, all over me, and all over the floor. Install is not easy at all and this ink system is non-functional.

Práctico y muy útil, recomendado.

Since purchasing this and setting it up I am not able to use the black in my print it keeps back flowing and I did everything according to the manual and whenever I place it lower than the printer it overflows. Also I didn't get all the pieces when the product was shipped. My first disappointing purchase on Amazon.

It was the fault of the printer HP 2548 and not the fault of the product!!

Si me agrado pero aún no lo he usado pero esta muy bueno

Parece ser bueno, pero no es fácil de usar. Por eso las tres estrellas. No pude hacer que me funcionara bien