88mm PLA09215B12H 4Pin Fan Replace for EVGA GTX 960 970 980 Ti GTX960 GTX970 GTX980 GTX980Ti VGA Cooler Graphics Video Card Fan

I had a failing fan on one of my EVGA GTX FTW 980's in SLI (which is two cards in one PC). One card was getting hot and upon opening up the PC and taking a look, a fan was intermittent. Cable power harness was short but it came with an extension 4pin adapter which you kind have to finagle under the heat-sink to get out of the way but it works.Some review on here claimed these were louder than OEM, which is false. Its the same exact fan(s) with the same p/n on the back as OEM, just the wiring harness is shorter. This kit worked fine for me, just take your time tucking the wiring in place to make sure nothing pokes out into the fan blades.Tested with EVGA Precision X1 app and both my cards now run at the same approx RPM and cool to a max 32*C as normal.No complaints.

Works on 10 series cards just need to be creative with wire location as these are just a bit short (if you want to use on a 10 series card). Temp on my card after install dropped to 70c under 100% (down from the 95-100c with the dead/broken ones). Also these are from the same manufacturer of the OEM ones they replaced.

so i bought these after reading the mix reviews & I unfortunately gotten a set where the wire for the fans is way too short. I am unable to plug them into the GPU. Short by half an inch.Would like to order & get the right length but judging by all the other reviews, this is not the best place to get them.

So i got these to replace the fans in my EVGA 980ti (one fan was dead so it would run the one working fan at 100%... ) and the fans are the exact same model as the stock fans from many EVGA cards so that was great, however the wires did not reach the plug. I resolved this by buying a mini 4 pin extension and pathing the wires around in a weird way to keep them and the connectors from rubbing the fans... which was a pain but ultimately it worked. you just have to be really clever with how you route the cable.Pros:Same model fans as stock, not some cheap clones.Cons:Mine had wires too short for my EVGA 980ti.Seems to be no way to predict what you get based on the other reviews.Honorable Mentions:You might get chords that are too long and its less of a pain to get your card working...you can always soldier the new fans onto the old wires to replace a burnt out fan...I was able to use this chord to get mine working but be warned teh connector is big and you have to route the wires away from teh fan, i ended up wraping mine through the heatsink fins and around the back of the heatsink...https://smile.amazon.com/gp/product/B07PFK926D/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Fit perfectly on my evga gtx 970.

The fans themselves fit my 980 ti, but the wiring is much too long, and protrudes obscenely from the card like ones nipples might through a t-shirt on a chilly November night.The fans are not as pictured (no EVGA logo). They do appear to function correctly, and they came with a sachet of ~just enough~ thermal paste to repaste the gpu.The warmth and thickness of these fans is right on point. (Amazon suggested mentioning "warmth" and "thickness.") Probably the warmest, thickest fans you can fit in your gpu. Tender and moist? Not so much.

I ended up purchasing this product because I needed new fans for my graphics card since the ones in my graphics card went out. Contact a seller, asked them if it would be compatible. He kept in touch with me until my product made it to my house and they were compatible with my graphics card. Definitely recommend buying your products from this seller.

Pkg contained 1 new [or possibly refurbished] OEM-style 88mm Dual-Fan Direct Replacement for EVGA Geforce GTX 9xx w/ ACX2.0 Cooling At first glance, this replacement kit is identical to the factory-installed fans that shipped with my EVGA GTX970 SSC (ACX2.0+). Visually theres no difference but a couple vital specs differ between the two and may be the source of the problem I ran into (more detail below) . The new one also doesn't feel as smooth when moving fan by hand to test bearings.[Orig Fans: 12v 1A, brushless, 5 ball bearing][New Fans: 12v 0.5A, brushless, 2 ball bearings] The fans I received unfortunately poduce a shrill constant squeal when running at lower rpms. For comparison, my stock fans were virtually silent at low rpms under idle & light loads (~1% - 40% fanspeed). The noise is relentless until it finally dissipates into the normal sound of turbulent airflow and the high rpm whirring of a gpu cooler under load.its not all bad news tho... Despite internal differences, the replacement fans dont feel like theyre made of cheap plastic or are flimsy. They feel about the same weight as the OG fans. The wiring harness is terminated correctly and slides into the guide clips with no tight spots, loose slack, or the need to bend and twist the living hell out the cable to mate with the power header.I hope i just got a bad refurb by chance and that theyre not all like this. Unfortunately I'm not in a position where i can afford to take my computer offline again to return them. (no alt vid cards, no onboard) So for now I have to deal with the extra noise now and again until i can get hands on a rtx 30xx or rx 6xxx (yeah right :(

Fans worked perfectly after I extended the wires by solder and heat shrink. Would have been 5 stars if the wires were the correct size and 4 stars if the wires were too long.