Pyle-Pro Ca, Pyle 1/4" Audio Cord-¼ to ¼ Inch Mono Jack Male Connection 50 ft 12 Gauge Black Heavy Duty Professional Speaker Cable Wire-Delivers Sound (PPJJ50)

I have tried their 15 inch speaker for emergency replacement in a bass cab, you don't want to go there...however these cables are a little better than that so go ahead and read on: I wanted 12 ga. and durable yet expendable. I use tube amps for my guitar playing and these can stretch out my speaker cabinets 50 ' apart to run at sometimes 8 ohms but mostly 4 ohms. These have heavy gauge stranded wire, thick and durable and well insulated so things stay as cool as possible and most importantly, better survival chances that they wont destruct if your stage monkeys roll the cabinets over them or they get stomped on (witholding bicycle cleats, hobnail logging boots, or golf shoes - so whatever your venue), which these have already endured. I am not sure of the copper content of the wire though. They're stiff so they probably could have more aluminum than copper in the conductor wire however the fittings fit snugly and appear properly dimensioned and there is good reinforcement at the terminal jackets. I am not sure if the insulation jacket is cross-linked material so outdoor wet stage might invite infiltration of moisture (How do you like my feedback on these so far?- FEEDBACK, GET IT?). I recommend you dip them in a UV resistant cross-linked polymer to coat them for better chances outside. They are decent utility for gigging however not as high grade as studio gear. IE: if you want pure copper conductor wire and gold plated fittings and decent soldered terminals you are going to spend 5 X the price for half the length or make your own which is the responsible, logical thing to do anyway.. Be secure, play with no shorts and remember "It might get loud"!

I teach aerobics classes and needed to replace worn-out speaker cables for my sound system. This is a good, solid, well-made cable at a reasonable price. The 1/4" plugs are very substantial and there is "flexible" rubber piece where the plug connects to the cable so there can be bending without breaking the wires inside the cable. I was pleasantly surprised to see this function as the wires in my old cables were breaking because of constantly plugging and unplugging them into the speakers. I have to put my system away after every class and put it back up before class so the speaker cables need to be durable. This cable fits the bill and I'm very pleased with it.

These cables are amazing.In this age of hyperbola advertising (Monster Cables, blah blah blah) this is an outstanding and understated product.The best cables for any amount of money you can buy. So good they can make sketchy equipment good and good equipment sound awesome.I almost returned an inexpensive PA amp "Nady MPM-4130 PA210 PA System with 4 Channel Powered Mixer and Two 10 Inch Speakers" [...]) because I couldn't hear anything out of it.This cable made a tremendous difference.To boot, the packaging turns into a clear carry-on case complete with snaps.Amazing cables. I've since ordered additional sets.This review is for the 15ft length.

This is a very nice cable and I am very happy with it. I do though somewhat agree with what a lot of reviews here are saying. Mine is brand new so of course it does work perfectly. Because of the reviews here though once I received the cable I disassembled one end. The soldering is not great and I can easily see this become a point of failure. For me this is no issue at all as I happen to be pretty competent at soldering and have some very nice soldering equipment. So why still give it 5 stars? I guess because I feel that the parts are of very good quality and getting two good quality jacks and 15 feet of cable would cost more. So if you look at these as a sum of their individual parts but come preassembled but you may need to reassemble at some point in the future they are still a good deal.One thing I plan to do in the near future is measure the wire to determine if they are indeed 12AWG or not. It is impossible to tell from from the outside of the cable what the actual wire gauge is. This is because the insulation thickness plus the actual copper wire is what determines the overall thickness of the cable. Thicker isn't nessesarily better. some cable are made thicker for a reason, I.e. internal reinforcement, hard service, higher voltage insulation, etc. Many, especially in audio applications, do this just to make the cable appear larger and therefore better. For audio the voltage is so low that the insulation can be extremely thin and still be effective. Therefore the cable can be fairly compact and still contain good sized conductors. Once I get them measures and calculate their actual wire conductor size I will post my conclusion.Update!This evening I had a chance to measure the copper conductor or each wire in this cable. What I measure is .0735 inches. What I found is that AWG #12 is .092 and AWG #14 is .073. So this cable is misrepresented right? Not so fast. The cable is marked "12 gauge" not "12 AWG." But that's the same thing right? Well not really. AWG is American Wire Gauge and is by far the most common system in the USA but not the only system. There is also SAE and SWG and a few others too. SAE would be the second most common in the USA but not actually very common at all. This wire appears to in fact be SAE 12 gauge. So though they have not misrepresented their product it is misleading. Nearly anyone in the USA looking at a wire that says 12 gauge would assume it is #12 AWG.All is not bad necessarily though. First off if we were to assume this wire is actually #14 AWG not #12 how much would that change? There are two areas of concern, first is current capacity and second is resistance (which affects current capacity). 12 AWG wire has .0293 ohms resistance in 15 feet and #14 has .0471 ohms. Both of those number are so small that they will have nearly zero impact on the system. The difference in current capacity is a little more substantial but I'm not certain it would make a bit of difference in a 15 foot cable either. The rule of thumb (actually the NEC code allowance) is 20A for #12 and 15A for #14. But that's for permenantly installed premise wiring and already has a derating factor applied. The allowable current for conductors not in conduit, not sheathed, etc is quite different. But regardless of the actual maximum there is a somewhat substantial difference. I'm not sure what wattage amp you would have to run to overload (build up excessive heat) a 15 foot cable but I'm pretty sure it would be something huge. I highly doubt any comercially available amp puts out an average of over 20 or 30 amps on the output. It's important to also understand that for it to be a problem it would have to to be an average of current not just momentary peaks.So unless you are pushing huge power for extended periods I wouldn't give it a second thought. If you are then you should expect to have to determine your maximum average output current, determine your maximum cable length and calculate the wire size needed. Then be certain what standard the cable manufacturer is using before buying. Or you can just feel the cable during use, if it's not getting hot you're fine.HTH

Actually, not using as speaker cable, using as channel switch cable for my guitar's amplifier....Have had no problems with it and for the price, can't beat it. My only complaint is it's too thick but again, it's because I have two of them taped together for channel switching...the pro to it being so thick tho is it will probably be very durable but that remains to be seen through the years to come. Being as good as the quality is, I'm sure also they're great speaker cables but like I said, i've never used them for that

Tengo un par de años o mas trabajando con esta marca y ninguna falla hasta el momento.

The cable seems to be of good quality. It works perfectly with no issues what so ever. I like the fact that its 12 gauge wire and I have no signal loss whats so ever. The 1/4" connections seem to be fine with no issues. Would buy again.

Received with cloudtail at 600 only & lucky me. Bang for that buck.

Really great cables for connecting tube amp heads to cabs(Laney IRT120H in my case).

It arrived before the quoted dates. I am happy with its performance so far.