Vance 20-3/4 Inch Long Stainless Steel Counter Trim Kit | 2 Pack | Heat Resistant | Oven Gap Filler | Seals Gaps Between Counter and Stovetop | Easy to Clean

Love thats its stainless steel - easy to wipe and lasts. Size was perfect for samsung stove. Adhesion is strong too. It definitely prevents mess going between countertop and stove. Though my stove height is slightly higher than countertop on one side so the the liner is lifted and some mess slides under. I will just use clear silicone under.

We like the look of our stainless steel ones, very slick and almost blend right in with the range. They do the trick for the most part - the trick being keeping crumbs from falling into the cracks. Because they are so stiff and our wood counter is so imperfect and tight to the range, the trim does not sit perfectly flat against the surfaces: there is a slight gap, so it acts more like an umbrella. This just means you have to be careful of crumbs that escape while you are cleaning and slide under the trim. If your counters have a cleaner edge and have more than a 1/8" gap (but less than the width of the trim) it may sit better. Also, measure carefully: our range is longer than the 20.5", so there are vulnerable areas. But mostly, I think they are great.

Very narrow to mimic a built in trim look. If you have an older house, like me and your floors are uneven at all and you want a level stove top, these probably won't work for you. We are using them anyway but it took a lot of work, adjusting the stove to get it level enough and sitting at a position that three corners are sitting more or less flush. The fourth corner is floating. My floors roll so much that the levelers on the range were not enough to make this work. You can probably shim things if you are determined to make these work, like I was. But if you don't want a hassle and your floors are very uneven, I would go with a flexible silicone option. These have no arch to them at all. Just a straight T shape. I wish my floors were reasonably level. These are fantastic and don't t look like add ons, if properly installed. Also, if your gap is more than a quarter to a half inch on either side, they might fall through if you don't want to use the adhesive to attach.

This stainless is just right for a stainless steel stove top and it lays nice and flat with a minimal profile. I'm surprised how much I had to keep searching on Amazon and almost gave up cuz all I kept finding were ugly umped black silicon. It's also the right length. One very important point is that you have to have your stove height adjusted to be very level with the adjacent counter top or else none of the space adapters will lay flat and work for you. Our stove installer/delivery guy had to work at it a bit to get our stove nice and even with the counter top. The vertical strip (that drops down a bit between the counter and stove), is off center and you can rotate the whole spacer 180' & reinsert it to get the right placement and fit. Also, I've seen other black silicon spacers that were way too wide with higher profiles and the black color would stand out unattractively unless your stove is black.

I liked what I ordered however it didn't fit. And thanks a bunch for unexpected don't send & giving my refund to me also. Maybe it will fit another stove, we'll see. Again thank you.Love & Laughter is the key!!!From Nelva Jealn

Very attractive matching our stainless steel range. Best if range is same height as the counter top.

They might work for some stoves, but a) they sent 2 right sides, and b) it would not insert correctly because it cut into the control panel for the stove (solid side, no groove to accommodate). Admittedly, I did not reach out to customer service to correct the duplicate side issue since it didn’t work with the stove panel anyhow, so can’t say if they would have rectified the issue -

I specifically wanted narrow, stainless steel, T-shaped, drop-in gap covers, so these fit the bill (they are 3/4" wide). These are a little expensive, for what you get, but on the whole, they are what I wanted.I do wish they provided a thin, self-adhesive magnetic strip, like some of the other companies do, instead of permanent, double-stick, foam tape. Even with a good fit, one still occasionally needs to remove the covers to clean away the gack that builds up along the edge.My biggest complaint is that the short edges had sharp spots and had to be filed down. (The long edges were fine.) For the price, these things ought to be flawless on arrival.