Meza-Hotas Desk Mounts 2 Sets of Hotas Mount for X52 X55 X56 T16000M Thrustmaster Warthog WinWing Orion 2 VPC WarBRD VKB Gladiator and Gunfighter

PROS: -Great quality materials and craftsmanship -Plenty of ways to adjust to fit your desk layout -Fairly easy to assemble -Mounts are very good and stable -Packaged with care and cushioned box CONS -Materials out of the box still had a lot of machine oil that was difficult to clean off. Oily residue was then inadvertently transferred to the joysticks, and desktop where the mount attached. -No clear instructions or example for how to attach or align the joysticks. I understand this is a case by case setup but a generic example in the assembly instructions would have been helpful. -Leftover plastic parts and screws included with no information or explanation other than to assume they are for permanently mounting the HOTAS to the platform. Overall, I would highly recommend these for anyone interested in this type of HOTAS/joystick setup. Just make sure you have a towel handy and clean them before trying out for the first time.

I've now used these for ~3 years and am still very happy with them. They do offset your sticks forward of the desk so you need to scoot your seat back about 20cm but that gives me a better immersive feel anyway as I'm piloting my star ship around pirating, er, I mean trading goods. ONLY complaint: The adjustable height rails extend about 30cm below the desk surface, which is fine until you're in a swivel chair and cut the nice sturdy, unyielding, metal corner into the tender flesh of your quadriceps. They need like a soft bumper there or something. Maybe it's just me. I dunno.

It’s very nice and easy to set up

Owned product for 3 months and have used it a lot. I have two joysticks: Saitek X52 Pro HOTAS and a Thrustmaster T.16000M HOTAS FCS. Both are compatible with these mounts and provide excellent stability on my glass desk. The construction is made fully of aluminum with steel bolts, very rigid and nice to use! The mounting bracket allows for some customization as to the orientation of the joystick and throttle. Each mount has a handle to easily attach and remove from the desk. One thing to note is that the joystick and throttle will be further away from the desk, so be aware of this and make sure you have enough room around your desk. The top mounting plate which makes contact with the desk is approximately 2.25 inches tall x 3 inches wide; it has a rubber finish to prevent slipping. I had to take off the arm rests from my chair so I wouldn't bump into my joystick/throttle. I've been looking a long time for a product like this, and I am glad to have found it!

I want to give it 4 or 5 stars but can't with how bulky and awkward it is. I do like that it feels like its made well with decent to good materials. For the price I guess its good. I also read some reviews before it arrived and I saw one guy say it did not fit the Thrustmaster but also did not say what Thrustmaster product it did not fit.. I saw another guy saying that it did not work with the Warthog without drilling holes into the plate.. That is not true at all I have the full TM Warthog HOTAS, all you do is remove the bottom plate of the stick and it mounts fine with no drilling of anything, down side is it left the inside of the stick exposed with no cover underneath so I am going to just use plastic to make my own cover for when it is on the mount. Throttle fits without doing anything also. I had to clean parts before messing with it much, it came dirty and oily from factory. when put together it leaves some metal edges exposed on both mounts, I took some baby bumper corners and cut them into strips and put the strips on the top and bottom folding them around the exposed metal edges close to legs etc. all in all for the money they are a decent product.

I have the dual T16000. There's no instructions, but there's also no clear way to mount these. The included long screws don't fit in the T 16000 case. I think the only way i'm going to beable to do it is to permanetly damage the underside of my T 16000 to attach it. I'm trying to fiond other work arounds for now until I resort to a permanent solution. The mount itself seems very sturdy. Only downside with mount itself is that screws for plates aren't locked on on side...so you'll be taking your stick off after finding the sweet spot just to tighten plate...then reattaching stick in hopes nothing moved. I'll update once I figure out how to actually use it.

I used this on my T16000M and it works like a charm. I just got my VKB Gladiator NXT today and I'm delighted to say that it also fits! However, I did notice that the rubber pads on the table top side seem to be moving. I've used this since April 2021 and as of June 4th, the pads are coming off a bit. Other than that, the quality is really quite good. EDIT: The support for the product is fantastic. I was sent new top plates with pads. They arrived very quick and are very simple to replace. 10/10, I'll be buying from them again.

I like this mount for one reason and one reason only, the easy snap on/off release mechanism. That’s where the positives end. My first gripe is with the bars your sticks attach to. They don’t push in, so the distance they extend from your desk is fixed. Even with a minimal base footprint, you’re still stuck with oversized bars jutting out. Next, as another reviewer put it, “watch out for the poky bits.” There are plenty of sharp edges to contend with, including on the main bars where the sticks sit, always poking out just enough to catch you off guard. Then there’s the assembly… To set the stick height, the nuts have to slide freely through a metal channel. On mine, the machining was sloppy, with rough edges inside the channel that made it nearly impossible to move the nuts freely. I had to use a rubber mallet just to get it in place — frustrating to say the very least. Two stars is the best I can give this one.

Sturdy build, easy to assemble and adjust. Comes with extra bolts/screws and mount screws for both the TM16000 and the Logitech series as advertised. Happily, I found that I could set an "inside cant" offset of about 20degrees (3/4 inch) which for me is a more natural and comfortable wrist position. (can also rotate outwards). These are machined aluminum not steel, so tighten things accordingly and use lock tight/thread lock if you want a "torqued mounting bolt". I'm completely satisfied with this purchase and the speed in which it was delivered.

All is good.

Solid easy to use and setup. Great addition to my desk cockpit.

Very sturdy little set up. But the stands sit 4 ot 5 inches back from the desk at the shortest setting. Which means you need to roll ur chair back so ur arms can comfortably grip the joy stick handle which for my t1600s are back 9 inches from the desk now.. which means i need to roll my chair way back which means im annoyingly far from the screen. Why not make them so the base of the joystick could be set roughly flush with the edge of the desk?

excellent produit . Beaucoup de réglage . super solide . impeccable finition . plein de vis .kit de clés . si tu chercher un support solide acheté celui ci. très satisfait