GREDIA 3/8" inch Quick Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System (Ball Valve+L+Y+I+T Type) + PVC Pipe Tube Hose Cutter + 5 Meters/16 Feet Tubing Pipe (White)

Good quality. Good value. Fast shipping.

The functionality is good. The leakage is minimal. The size is right. The fit works. The thickness is thick. The system that tells you what to write is annoying.

This with maybe a extra pack of fittings and filter (very inexpensive) makes life a breeze especially if you are the one that makes coffee for two! It is so easy to use but there are two small things to remember. First use a little teflon tape especially at the ell going into the coffee reservoir. I couldn't get mine to stop dripping because of the small fine threads so I simply applied a little super glue to it and hand tightened it and within 5 minutes that took care of that. Although I'm a retired commercial plumber I'd probably use the glue instead of teflon and be done with it. The second thought: again thinking as a plumber, think of a commode tank and how you can adjust the water to almost any level and remember this during your install: although you drill a small hole in the reservoir where the ell goes into it, why do it the very top? the float does come with a gasket to help seal the water from leaking but back to the commode, you don't have to fill it to the top. Drill the hole about 2/3rds from the bottom so when you adjust the float the water doesn't even rise over the hole you drilled so it can't possibly leak. I will assure you it will fill the tank faster than it can use it and that's with our Kureg pot and k-cup going at the same time. So, fill it half way and cut out any risk of a leak when you are gone. I truly hope this makes sense to someone out there and helps. Have a blessed day!!

No complaints about the valve and fittings. Works well with no leaks at all so far. The cutter is very cheap and the blade holder broke after only a few cuts however.

Everything is good quality and what I needed to hook up the reverse osmosis filter.

Used this to plumb my coffee maker. The float fit fine in my Breville Express. Came with plenty of tubing and parts.

First off, you will need to drill a 5/8" hole. Not sure why they don't tell you this anywhere. This float is easy to install and comes with the necessary fittings, plus extra fittings, clips, water line and a line cutter. Drill the hole, insert the threaded end into the hole with a gasket on the inside and then put the other gasket over the threaded end on the outside. Apply the plastic nut you had to take off to get it thru the hole. Apply Teflon tape to the threads of the elbow. Screw the elbow into the end sticking out. Push the RO line in til you feel a click.

Great price

J'ai changer mon installation adoucisseur de place et il s'est adapter parfaitement à ma nouvelle instal. Parfait

es un excelente producto

l annonce de ce produit est mensongère ! acheter 2 fois renvoyé la première fois car manquait le robinet flotteur recommandé une 2 eme fois et toujours pas de robinet flotteur ! l annonce correspond uniquement a du tuyaux plastiques blanc je suis pas content du tout

Kwaliteit en goed te bewerken

As per item description. All good. Fair price. Recommended for Reverse osmosis water system.