Pole Mount Kit for 30W to 60W Solar Panels,Heavy Duty Adjustable Aluminum Mounting Bracket Kit with Hardware for Outdoor,Solar Panel,Antenna,Camera Mount,45-Degree Tilt Mount Fits 2-Inch Diameter Pole

It's a lot beefier than it looks in the product pictures. I had reservations about the method used to set and hold the desired angle. But once I had it in hand, those reservations went away. It has no problem holding the 50W panel I used. I would have liked some spring washers for the two bolts that hold the angle, but that's more for a warm fuzzy than an actual product deficiency. I had to use the provided clamps to hold the Callsun 50 Watt Solar Panel. The top clamp is hard to keep straight when you are also holding the solar panel. An additional slot/tongue on the top clamp would alleviate this. Or have another person help you. Or, mount the bar to the panel before attaching it to the bracket. I would by this again. And, its pieces will fit in a suitcase!

I had an Internet satellite dish removed from our property and they left the steel post and small dish that received the signal. I removed the dish and mounted a 20 Volt solar dish on this device which places it up in the air getting early morning sun. It came with mounting bolts and straps to go around a post of varied diameters and it all went together simply. I recommend it for solar panels that are smaller in size. I would not put one of more than two square feet on this particular mounting system.

Held small solar panel for powering remote comm’s unit in the field

Sturdy and worth the trouble. Better than making your own. Leave the blue plastic on to assemble on pole. Comes with gloves to avoid cuts. Buy lock bolts and nuts and l hardware to attach solar panel. Attached drawings to assist anyone else. Also, I'm just hooking this up as an alternate temp system to see if it will boost my existing panel that gets shading, therefore using a T farm bar. pic of it above. Will include additional pics when complete. Waiting on stainless washers and nuts.

My second unit and easy to mount. Adjustable and solid. Meets all my needs.

I am confused by this review section as many seem to be written regarding a pole mount. My review here is exclusively for the "Adjustable Solar Panel Mount Mounting Rack Bracket Set Rack Folding Tilt Legs, Boat, RV, Roof Off Grid (40.5 - inch Length)."The product above should work fine for mounting smaller to medium-size solar panels. For my 300-watt class panels that require a little over 39 inches between mounting holes, the main bracket arms were a little too short and could not be used, despite the claims in the marketing text. Even if the bracket arms managed to be 40.5 inches long, the closest mounting holes to the ends were well inside of that distance on both ends so there was no way to bolt them up without drilling new holes that would have left very little material left for structural integrity. The description should be revised to indicate only the distance easily covered by the bracket arms between mounting holes with no suggestion that they might cover more.

Material was great and easy to install. I have a 50w solar panel mounted to my sailboat mast crutch. Works great. Only issue is it needs 6 bolts but only comes with 4.

I needed a bracket for my 30 watt solar panel and this appeared to be a reasonable choice. Unfortunately, it is typical of the solar equipment sold through Amazon. It's all Chinese produced and distributed with very poor information enclosed to install and utilize the product. First the "User Manual" is a joke. It is one page and gives not specifics as to how to put together the unit. Several pieces were included that are not clear how they are to be utilized. There are no bolts to attach the panel to the bracket and when attempting to go to the website for assistance , it appears to be non-functional. As stated, this is very representative of this type of solar product sold here. I would suggest...buy American made.