Itek Case EVOKE New Concept Mini Tower, mATX, Mini ITX, 2xUSB3, 0.8 mm, Black

Really great build quality, surprisingly heavy for its size which is a good thing as I know my internal parts will be safe and secure. The case seems to have a fully modular design, meaning you can swap the bottom and top panels if its more convenient etc.I put an mATX system inside this case and it is a bit of a squeeze, but as long as you know what you're doing you should be fine. My ATX PSU is 160mm long and fit fine with my RX 6700 XT (279mm) however the rotation of my CM v750 V2 PSU meant that the PSU extender cable actually would not fit initially due to the rotation of it colliding with the case frame, so I had to use some brain power to make it fit. As this case seems to be a clone of the SAMA IM01 I'm sure you could use other pre-existing videos and forums to help.Overall I would highly recommend this case to anyone looking to dive into the SFF PC world, if using mATX parts just ensure you do your research and be prepared to do a lot of cable management ;-)

The build quality is really nice. And it’s among the most compact mATX case you can find. The clip panels are a welcome features to quickly access your components. Bear in my mind if you install an mATX motherboard than you will be limited by the number of fans you can install at the bottom as the jumpers will interfere with 120mm fan size. I manage to install only one. 240mm AIO would also be impossible unless you install with ITX motherboard or invert the case and reverse some panels which is possible. Cooler height is limited to around 154mm. I’ve installed the noctua nh-u12a and you can just about the close the panel. Would definitely recommend. I would’ve liked some USB-c front ports and more clearance for 280mm AIO but I’m ok with the current design.

This is a rebrand of the Sama im01, one of the the smallest matx cases that accept full-size GPUs. Very well thought out and I couldn't find any build flaws.Note that if using an matx motherboard, you may not have enough room to include bottom HDDs/fans. Similarly, an ATX PSU blocks one of the possible top fans.

A fair bit bigger than the last case I had but can support matx motherboards and psu's. Case came with one 80mm fan and dust filters on all openings except the back (you would probably use the back for exhaust anyway).Fairly tricky to work inside would probably recommend a modular psu as the wires hand down near one of the bottom intakes and there are a lot of them otherwise.

This case design is produced by many firms under different name. Its basically the coolermaster NR200, but for BOTH itx/matx motherboards AND power-supplies. Nothing comes close matx size-wise.

Nettes kleines Gehäuse, wo viel reinpasst.Hatte zuerst ein MSI B550M PRO-VDH WiFi AMD5700X (mATX) und jetzt MINISFORUM BD770i ITX Motherboard, AMD Ryzen 7 7745HX (ITX) mit RTX 4060 verbaut.Ist ein kompackter leiser und kühler Wohnzimmer PC geworden, der aber auch noch genug Spieleleistung bringt.

Le uniche note negative sono che mancano delle viti larghe per aggiungere delle ventole, oppure io non le ho trovate. Per il resto, ha davvero superato le aspettative.Il case viene fornito con una bustina in simil-stoffa, utile per coprirlo quando si è via e non fargli prendere polvere. In più, c'è una mini scatolina divisa in compartimenti, con le viti e accessori necessari. Non è presente un libretto di istruzioni, ma ho trovato la pagina ufficiale del case molto esaustiva.Molto utile la ventolina da 8mm sul retro del case, perchè fa capire che tipo di ventola è necessaria.Le uniche parti in plastica del case sono i pulsanti, i dentini che mantengono le varie facciate e i piedini. Decisamente molto più robusto di altri case con la parte frontale in plastica.Non fatevi spaventare dal cavo di alimentazione, perchè forzandolo un po' ci entra senza troppi problemi.⚠ Unica accortezza, nella parte davanti non è possibile inserire una ventola con misure standard ma bisogna optare per una più stretta.In questo case ho inserito:Scheda video dimensioni normaliScheda madre micro-ATXDissipatore stock, ma lo cambierò a breveAlimentatore ATX (non modulare)1 ventola 120x120x25 mm1 ventola 92x92x14 mm

Enjoyed the build quality and ease of mount

Me costó mucho encontrar una caja del mínimo tamaño posible y para fuente de alimentación estándar y placas microatx. Muy buena calidad y tamaño ideal.

Les quatres côtés et la façade sont démontable sans outil, ils sont chacun équipé de filtres à poussière métalique aimantés, les protège slot pcie ne sont pas "a tordre" comme dans les boitiers pas cher mais sont intégraux et vissés. Même sans les panneaux les assemblages sont rigide. Il y a des support internes démontables qui au choix receveront des disques ou des ventilateurs. Il peux être équipé d'une alim ATX ou SFX, sans géner les cartes graphiques longues, et si nécessaire une deuxième carte graphique peux être installée à 90 ° si vous vous procurez une rallonge PCIE 16x. L'ensemble reste compact et sobre. C'est presque du haut de gamme à prix d'entrée de gamme.