Rubbermaid Commercial Products 2-Shelf Utility/Service Cart, Small, Lipped Shelves, Ergonomic Handle, 500 lbs. Capacity, for Warehouse/Garage/Cleaning/Manufacturing

This is a good cart. Two shelves are better than three shelves for our use in a church kitchen. Easily put together, the cart takes 15 minutes to get up and running. There are about 26 screws required to install all eleven parts. You will find installation easier if you have a screw gun with a philips head bit. However, the two front wheels will probably require a hand screwdriver because of the locking mechanism getting in the way of a drill. No instructions came in the package. Be sure you put the swiveling wheels on the front--opposite the handle--rather than under the handle. Swirls are evident in the material from the molding process, but though they look rough, they feel smooth. The assembled cart is solid. You'll find it easy to push and capable of holding and carrying a lot.

This mobile work cart is solid, well-made and easy to assemble. It holds a lot of weight with no problem, even though it's light enough to pick up by hand (when empty!) and easily maneuver around if needed. Once it's all together it rolls easily - I didn't have the problem that some others had with it. The width of the cart is well-chosen, it's not too wide to easily fit alongside a garage wall, but it's wide enough to hold a lot of stuff. I've used it to do a front brake job on a car, and it held the brake rotors (heavy) and all the tools on the top shelf with no problem. And then the bottom shelf is like a "bonus room", and can hold the car jack, wheel chocks, etc. That way, I was able to work on one side of the car in the afternoon, just wheel the cart to its storage position along the wall, and wheel it back out the next morning to finish up. And the top shelf is at a good working height, so I was able to do all the work for the brake job on it, like cleaning the bracket, the guide pins, etc. The only thing I'd warn about is that the assembly instructions are printed on the box, rather than in an actual instruction sheet. Not that the assembly is difficult, it's pretty straightforward and mostly easy to follow from the diagrams. But they didn't clearly indicate where the swivel pair of caster wheels should go, so I put them on the end *away* from the handle. In retrospect I probably would've preferred them on the end where the handle is. Not like it can't be changed, but I'm just saying think about where you want the swiveling casters to go before screwing them in!

I bought this cart to cart around a small selection of tools and supplies around the plant. It sure beats pushing around a heavy tool box. I keep some chemicals, rags, and a small bucket for trash on the bottom shelf. The top shelf is a good size. The width is perfect as some spaces are narrow and this cart seems to be the perfect size to squeeze through otherwise impassable areas. It comes with cheap casters. 2 swivel and 2 fixed. They are NOT ball bearing. Only a shaft through a plastic wheel. I replaced them with 4 swivel casters I picked up from the local hardware store which are ball bearing and it rolls much better now. The mounting plate hole pattern is a standard size so many after-market wheels will fit this cart just fine. The increased steering capability of 4 swivels can be a love-hate-love relationship; sometimes it doesn't want to steer straight, and then there are times it is able to maneuver in the tightest of spaces and I absolutely love that they all swivel. The handle sticks out so you wont kick the cart with your feet and provides a nice little catch-all bin for wire nuts, screws, etc. and there is also a pen holder which can accommodate several pens, markers, and utility knife. The handle is comfortable and at the right height for me - I'm 5'10" and I don't have to hunch over to hold it and my feet don't hit the cart or wheels. It seems very sturdy and I feel comfortable it will live up to it's weight capacity rating without any issues. Assembly was a breeze with a minimal amount of fasteners.

This is a strong, well-made cart which can handle a huge volume of stuff. It is sturdy and rolls easily when loaded down. My use is primarily is moving heavy or bulky items on a smooth concrete shop floor. This includes bags of concrete, firewood, building supplies and tools. It's a high-quality item that makes lugging heavy things around much easier. It pairs very nicely with a gorilla cart if you like having options. The medium size works perfectly for me.

Great cart. I ordered better wheels and they had a few mounting hole options. I get compliments and really enjoy this upgrade to a wider cart

Overall, I really like this cart. All of the hardware was in the box, but the screws are made of a softer metal and caused some issues with installing. Would recommend. Fantastic that it is made in the USA.

We had bought several of these for use in our charity that provides clothing, school supplies, toiletries, and food to children in our community. By accident, I bought a different brand and it made me realize how superior the quality is on these carts. The wheels hold up well to heavy donation loads and most importantly, the handles are molded into the body of the cart. The other brand I bought had a handle that was a separate piece which slid on to the body. This broke off a few weeks after using it. Our oldest ones are over 5 years old and they have held up to regular use. The shelf lips are high enough to secure boxes and garbage bags of clothes. The plastic is easy to clean which was super important to us during the pandemic. Although we use this inside, I can definitely see this being used outside or in a garage. The tray holds a variety of things (for us: tape, scissors, pens, rubber bands and coffee!). I also like this is made in the USA.

Heavy Duty. Durable. Well built. Love the locking wheels.

Having a decent size shop cart was important as most are too skinny at 18" wide and made of light gauge sheet metal that will rust. This cart has two large shelves, a wide stance, and cannot tip over. I found that this plastic is even resistant to brake cleaner ( that will eat the paint off those metal carts ). It works great for potting up plants, too. The whole thing assembled in 15 minutes. Good product. Amazon shipping took only 5 days.

Pretty easy to assemble. The cart is much lighter then i expected while empty, but feels very sturdy when there is load on it, even when pushed to its limits(250lbs on each level). One thing to note, is it tells you to put the rotating wheels on the back of the cart. It gives you a bit more maneuverability and handling. Where i use this there are tight corners in to doorways that can make the cart awkward to maneuver through, and require me to lift the end without the rotating wheels to pivot the cart around a tight corner. this is really awkward to do trying to reach across the cart while you are halfway through a doorway. I switched the wheels so that the rotating wheel are on the front. This gives the benefit of having the side that needs to be lifted to pivot on my side of the cart. This also means you can use the big rugged handle to lift. The one issue I have is other departments around the office like to steal it instead of using their old lower quality carts. >.<

This trolly is all it’s cracked up to be. Reading allot of reviews that go back about a decade, users have praised the simple and strong design of this for a long time. I use this smallest size Brute to put my Bluetti AC-200 PL portable power station on. The Bluetti is rated with a weight of 62 ish pounds and this is no problem for this cart. With plenty of space left over, I fill up the rest of the cart with accessories and several large extension cords to make the whole unit portable and easy to move on one floor of my house. I’m kind of surprised these PPS companies don’t make similar carts with their branding as it’s really an excellent way of moving the heavy generators around on a single floor to get them positioned where you like, without breaking a sweat moving all this heavy stuff. Ideally, I wish I could budget the same system on each floor of my house including the basement that has the sump pump and other things. But, baby steps as it gets expensive for such a luxury of duplicate systems for convenience. The cart holds insane weight, is easy to assemble and for a flat surface, the casters are fine. There are upgraded casters one can purchase that are larger, have a more aggressive tread and some that are even pneumatic (tires that take air) which could be worthwhile if using this outside on a job site or uneven surfaces. The fittings I’ve read are pretty universal. But the wheels it comes with are fine for indoor use. The elevated handle is a good design so you need not hunch over pushing or pulling it. The resin material is so robust you can handle it without extreme care as it can take considerable rough play. There are several other brands out there like this, but I went with the original Rubbermaid as it has the strongest reputation of performance and longevity. Just pay attention to your use case as there are different sizes. This review is for the smallest. But for a bit more cash, you can get larger ones. The Klein Tools model almost had me. But as I stated, I went with the original and probably the best in this class. Very much recommended.

El carro llego completo y a tiempo. Las instrucciones son claras y viene con la cantidad exacta de ferreteria. Solo recomiendo usar un desarmador electrico o rotar turnos al momento de ensamblar, ya que los tornillos tienen mucha friccion con el plastico y se requiere de mucho esfuerzo para que queden bien asegurados. Pero una vez logrado, es bastante rigido. Lo usamos para mover contenedores de quimico y cubetas sin mayor esfuerzo.

Strong and high quality. Worth the money