My Wall H16-1WL Ceiling Mount for Projector (Capacity 15 kg), distance from ceiling: 225 mm).

I purchased this mount for my Epsom 5350 projector.Well made and cheap,certainly strong enough for my projector weight.Easy to assemble everything is included just requiring drill and pozi driver.Plenty of adjustment so no problems aligning up.I ended up corner wall mounting my projector as still within the 30deg spec tolerant,which made the dreaded cable run nice and tidy (trunking still to fit in photo)I'm very happy can fully recommend this product.

Great product, excellent value, quality materials and looks pretty cool on the ceiling!Not to take away from the above, but I wanted to make two minor points for product improvement (just in case the designers ever look at this...) 1: my projector needed M5 bolts to attach - including these as well as M4 and M6 would be super helpful. 2: The cylinder and the hook could probably be made as a single part - reducing manufacturing cost and removing the 'weak link' from the connections.Thanks for reading.

Very well made, excellent value mount. Just two things bothered me: the plate that attaches to the wall is shaped to look best pointing front to back. This is not possible however if your joists (and almost all these mounts will be screwed to ceiling joists) are orientated at right angles to your projector, so you will need to position the plate at 90 degrees to it's designed orientation. The alternative would be to access the joists and fit some extra timber in the floor/roof space, but you'd have to be a serious perfectionist, possibly struggling with some other personal issues if you felt you needed to take it that far. For me, this is no more than slightly annoying and shouldn't alone be enough to put anyone off from buying this excellent mount. Comes with two allen keys and a range of bolt sizes to cover most projector types with either four or three mounting points.There is another small problem that buyers should be aware of. The otherwise excellent and clear instructions do miss out any mention of fitting one particular bolt that holds the bracket together. Someone else's review suggests this is a serious safety issue. My feeling is that anyone who manages to get this installed without the bolt and only the small grub screw in place has probably managed the impossible while simultaneously proving the old adage 'never underestimate the stupidity of folk...'

I purchased this to mount an Epson 5600 projector.The mount came well packaged. It came with a generous selection of machine screws for attaching to differing projectors, each size individually wrapped and clearly labelled. The instructions explain clearly how to assemble the mount and how to affix to wall at 90 degrees, or to the ceiling.My projector has 3 mount holes which this H16-1WL managed to accommodate using trial and error with the many options of arm and screw positions that the mount and arms allow. I wanted to mount the projector to my back wall (to give me extra projection distance as I had to avoid an old chimney ceiling cavity). The mount would have been at 90 degrees at the hinges, which it can comfortably do. I failed sadly as my projector mount holes are at the front of the projector which didn't allow enough distance from the hinges to the mount plate to pass far enough past the projector. No problem for a smaller projector, or for a projector with mounting holes more centralised or towards the rear.Instead I ceiling mounted. Happily, nay, amazingly there was a beam exactly where I needed it. I offered the mount plate to the ceiling and marked the 2 screw holes. Two strong screws, washers and wall plugs are included with the mount plate which I trust are more than fit for purpose.Positioning and tweaking are hinged and tightened using allen key bolts (keys supplied). This allows for forward and backward rotation as well as left to right.I do have one small niggle with this mount however, the 360 swivel locking nut. The mount is in 4 pieces, the ceiling plate (1), spacer tube (2) which screws into the mount, top tilt hinge (3) and lastly bottom tilt hinge and projector mount (4) (numbers are indicated on one of my pictures). The top tilt hinge inserts into the spacer tube and is locked in place using an allen key grommet screw (5) that wedges it tight. Whilst this is suffice, sadly, when tightening it does have the habit of moving the hinge shaft slightly, maybe a fraction of a millimetre, which can be over an inch or more of movement on the projected image surface over 2 meters away. Please note however, this is a small niggle - and just needs a firm grip and patience. I correctly aligned within 2 minutes of passive, patient, manhandling.My local electrical shop quoted me £50 for a mount, this is absolutely more than adequate. I was impressed with the vast array of screws and tools included and the clear instructions, a delight at this price point. I believe it looks clean and professional and was easy to fit together and adjust.There are holes on one side of the connecting tube, again, pictured, that aren't in the manufactures pictures. I case that's of importance to you.In summary, a great bit of kit.

This really is a nice product. After lots of looking around at the ceiling mounts the reason i went for this one is the part you see when mounted is finished really nice. Others seem to have a bit of a industrial look to them. This was going in a bedroom so wanted the best looking one i could find. All the wiring also runs through the centre of the unit so very little is exposed and makes it neat and tidy. My projector screwed up to it a treat too so a good buy all round.

This projector mount is amazing. I'm using mine with a BenQ W1070+ 1080P Full HD Short-Throw Video Projector and it fits perfectly. I've had no trouble adjusting it and only took a few minutes to put up. Do make sure you know where your supports are in the ceiling as you don't just want this to hang unsupported from a plaster board ceiling. When I put mine up I made a bit of a miscalculation and was off by a few cm. It didn't cause any issues though as the base is quite big and covered the extra hole nicely :D

Very good value & easy to install. Very pleased

It's well built, a good piece of kit for the price. Only problem is that it's not quite universal. It doesn't come with the required bolts for an Optoma HD600X, a reasonably popular projector which shares the same mount with others of that brand. For this projector you will need some M3 bolts, this only comes down to M4. Also, the arms don't fit the Optoma either, so you have to 'bodge' it a little by getting some slightly longer M3 bolts and use without the adjustable arms.Works though.

Die mywall H16-1WL Beamer Deckenhalterung bietet eine robuste und äußerst flexible Lösung für die Montage von Beamern an der Decke. Mit ihrem universellen Design und der hohen Tragfähigkeit erweist sie sich als ideal für Heimkino-Enthusiasten und professionelle Präsentationsumgebungen.Positive Aspekte:- Universalität und Flexibilität: Die Halterung ist universell einsetzbar und passt für eine Vielzahl von Beamermodellen, dank individuell einstellbarer Lochabstände mit einem maximalen Lochkreisdurchmesser von 31 cm. Dies sorgt für eine breite Kompatibilität und erleichtert die Installation verschiedenster Beamermodelle.- Beweglichkeit: Die Halterung bietet ausgezeichnete Anpassungsfähigkeit mit einem seitlich drehbaren Bereich von 360° und einer Neigbarkeit von 180° durch das einstellbare Kardangelenk. Diese Flexibilität ermöglicht es, den Beamer perfekt auf die Leinwand auszurichten, was besonders in komplexen Installationsumgebungen von Vorteil ist.- Robuste Verarbeitung: Gefertigt aus stabilem eloxierten Alu-Druckguss, garantiert diese Deckenhalterung eine zuverlässige und sichere Befestigung des Beamers mit einer maximalen Traglast von 15 kg. Die qualitativ hochwertige Verarbeitung verspricht Langlebigkeit und Stabilität.- Kabelmanagement: Ein weiteres Highlight ist die integrierte Kabelführung, die dafür sorgt, dass alle Anschlusskabel ordentlich verlegt werden können, ohne dass Kabelsalat entsteht oder Kabel die ästhetische Ansicht stören.Fazit:Die mywall H16-1WL Beamer Deckenhalterung ist eine Top-Empfehlung für jeden, der einen Beamer professionell und sicher an der Decke montieren möchte. Die Kombination aus hoher Flexibilität, sicherer Tragkraft und durchdachtem Kabelmanagement macht sie zu einer ausgezeichneten Wahl für sowohl Heimkino-Liebhaber als auch für professionelle Präsentationsräume. Aufgrund ihrer herausragenden Features und der einwandfreien Funktionalität verdient diese Halterung eine klare Bewertung von fünf Sternen.

Degelijk en mooi product! Erg tevreden

La qualité des pièces est impressionnante. La boîte mentionne d'ailleurs une garantie de vingt ans (!). Le mode d'emploi est constitué de photos et de schémas numérotés mais sans explication. Ce n'est pas bien grave car il est facile de comprendre ce qu'il faut faire. La plage des réglages est très large (plus ou moins 90° en vertical et en horizontal) et ces réglages sont faciles à effectuer. Tous les outils sont fournis, à part une perceuse, une mèche et un tournevis cruciforme.

Un soporte para el proyector prefecto, por el precio que tiene es difícil pedirle algo más, se puede instalar en techo o pared y viene hasta con los tornillos para el anclaje, que no son los mejores del mundo pero hacen su función perfectamente.Tarde como una hora con el montaje más por mis problemas con instalar cosas centradas y rectas que porque tenga dificultad, no ofrece subir o bajar la distancia y otras funciones que tienen los soporte mucho más caros pero si se puede adaptar girando en todos los sentidos con un poco de paciencia para apretar mientras ajustas.El único punto que creo que se podría mejorar es que al instalar en pared en lugar de techo toca verificar muy bien que entren después los cables.Saludos!

Il prodotto è completamente conforme alle aspettative!La compatibilità a mio parere è estrema con qualsiasi tipo di VPR (io lo utilizzo con un OPTOMA HD161X). L'installazione a soffitto è estremamente facile ed affidabile, così come l'assemblaggio del prodotto in generale (il pacco contiene tutto quanto necessario all'installazione, compreso i fischer per il montaggio a soffitto).Le possibilità di regolazione sono soddisfacenti; c'è possibilià di muovere tutti e 3 gli assi rotativi ("imbardata", "beccheggio" e "rollio"), mentre gli assi lineari ("x", "y", e quota "z") sono chiaramente fissi, quindi prima di fissarlo alla parete bisogna prendere per bene le misure rispetto allo schermo di proiezione!Consigliato!