GTINTHEBOX For 1988~1997 Nissan D21 Hardbody PickUp, 1988~1995 Nissan Pathfinder Front Bumper Turn Signal Light Smoked Lens Amber Lamp

Amazing LED turn signals look great and are so unique for my old truck. The little module that allows them to work with a lower LED voltage gets super hot though. Just keep that in mind. I didn't wire up the included white wire so they do not turn on with the corner lights (as running lights) and only activate with my turn signal. I like it that way and it helps with the module getting warm. Must buy for a Hardbody

1995 Nissan Pick-Up They were kind of easy to install.It adds a running light feature, the extra wire needs to attach to the positive wire on your running light (if you want that) White running light but when the turn signal is active the white goes to an amber that blinks in the direction of the turn. Imagine the smal amber lights lighting up one at a time in the direction of the turn. (if you don't install it upside down like I did) but I fixed it. :-PAlso about the hyper flash issue that Rocky mentioned. It is a real thing BUT it can be fixed if you go to AutoZone or a similar place and purchase an electronic turn signal flasher. They make ones that are "compatible" for LED and they call them electronic turn signal flashers. The old ones are called mechanical turn signal flashers.Thank you for your review Rocky and you can get it right Rocky for $10.99 They can be had on Amazon too but you would need to make sure they are for your particular vehicle.

These are great. Very bright for smoked lenses. The seller was great too. Shipping was fast. I cracked one of the lenses installing because I over tightened it, so I had to get another one. So take my advice and do not over tighten during installation. The reason for the 4 stars is because the lenses can break easy. They are not the same quality as OEM but are still well made. I read another review saying they weren't sealed properly, but that isn't the case. The lenses seal the same as oem, which is just a gasket in the light housing that the lens pushes into. They fit well in the bumper trim, but if you're trying to make them perfect you're going to have to shim the bottom. I glued a couple grommets to the bottom corners on the back of the light housing abd that worked for me. The lights come with resistors but you should really buy a replacement flasher relay for LED's . The sequential blinkers are awesome. If you want the white marker lights to function you will have to connect the white wire on the light to the positive wire on the factory marker light wiring harness. The blinkers are plug and play, the white marker light is not and needs to be spliced. I would recommend these to anyone .

I love the look it give off this is a very good product and they work very well this is a highly recommended product

The media could not be loaded. I bought these as a replacement for my turn signals on my 95 Pathfinder. I liked the option of a daytime running light, so I decided to try these out. I recieved them quickly and installed them immediately after delivery. I then immediately started a return on them 5 minutes later.They are dim as can be (see video). I can barely see the trunsignal in the day time standing near the truck. I can only imagine this being non existent to a car driving. I will just go back to a factory bulb style light for my replacement at half the cost. SAVE YOUR MONEY.

These are some Awesome "Sequential Directional / Daytime Running Lights" if only I can get them to work. I had purchased these from another vendor before and they had issues with it working. I thought I was going to do better by purchasing them from Amazon but only to experience the same problem. When I think of it now, I should have ran 12 volts DC directly to the harness to see if it was making continuity but I didn't. But overall if you can get these things up and working they're going to be some Awesome looking directional lights. 👍

I got them in and installed them to find out that one had a short in them and kept blowing my fuse it would work for a second then the fuse would blow which never happened with my old lights they are reasonably priced if they work right they look great lighting is good wiring was simple they fit great just the function ain’t there on one of mine the other one works great does it’s job but I’ve had to take them out do to them blowing my fuse everytime I turn right

They look good, product is very fragile material and don’t fit perfectly on the bumper