10' x 10' Metal Outdoor Storage Shed

I’m extremely happy with this 10x10 shed! The assembly was straightforward, and the instructions were clear, making the process much easier than I expected. The shed feels very sturdy and durable — it’s perfect for storing all my garden tools, bikes, and seasonal items without worrying about weather damage. The spacious interior gives plenty of room, and the double doors make it easy to access everything inside. The design looks sleek and fits nicely in my backyard. Overall, this shed offers excellent value for the price, and I would highly recommend it to anyone looking for extra storage space.

’m really impressed with this shed! The metal structure feels solid and well-built — once assembled, it doesn’t shake or move even during strong wind or heavy rain. The design is simple but looks very clean and modern in the yard. I love that it has double doors, which make it super easy to move big tools or equipment in and out. Inside, it offers plenty of storage space for lawn equipment, bikes, gardening tools, and even some extra boxes. The roof vents are a great touch — they help with airflow so it doesn’t get too hot or humid inside. Assembly takes a bit of time if you’re doing it alone, but the instructions are clear and the parts fit together tightly. Once finished, it feels extremely durable and weather-resistant. Overall, this shed is an excellent investment for anyone who wants a clean, strong, and weather-proof space to organize their backyard. Definitely worth it for the price!

What we like: looks nice, provides shelter for our outdoor gear, keeps it safe from our dogs and will prevent causal intrusion. Pretty much what we wanted. But please read on… What you might need to know: the metal is thin gauge and can be damaged or destroyed with not too much effort. So not good for heavy duty or frequently used equipment. Not recommended for areas prone to hail storms. Not recommended if you are concerned about theft (we have a fenced in yard and security cameras). Yes, it locks, but it will only slow down a determined thief. Also does not come with a floor. Highly recommend that it be placed on level ground as uneven ground is enough to torque the pieces and interfere with set up and use.

I rarely leave negative reviews, but this shed was such a headache that I feel I should warn others. Instructions: The assembly manual was vague and poorly written. Steps were confusing, and diagrams didn’t match the actual parts. It took far longer than it should have just trying to figure out what went where. Quality of Materials: Several pieces arrived bent or damaged right out of the box. The metal felt flimsy compared to other outdoor storage products I’ve purchased. Hardware: The screws provided were not the correct size for many sections. I had to go out and purchase my own just to finish the job. Pre-Drilled Holes: Most of the holes didn’t align properly, making assembly extremely frustrating. We had to force things into place, which definitely compromised the overall sturdiness. After hours of struggling, the shed is standing, but I have little confidence in how well it will hold up over time. For the price, I expected much better quality and easier assembly. I would not recommend this product.

I ordered shed, she’d arrived on time. One box. That box said “one of two”. Contacted seller, they said second box would arrive next day, which it did. I’ve seen a few reviews saying the instructions were poor and that some of the pieces didn’t line up. That was not my experience. I did have some issues with half of the ridge pieces not lining up, but I think I put that part together incorrectly. I’m any case, the screws will self tap, so I was able to attach the panels no problem. In some ways I prefer that, the screws bite better. I built this on a sheeted deck that I had built for this the previous day. The shed itself took about 5 hours to put together. I did what I could on my own, then my girlfriend helped with the rest. I had put together a metal shed a few years ago that was a lot tougher, so I was expecting worse. So far this thing seems fine. For the price, I can’t complain, unless it leaks like a siv when it rains. But it looks like that shouldn’t be an issue.

First off...I knocked off one star because the packaging wasn't terrible but it also left me with several pieces with some visible dents. The second star was knocked off because of various items...overall build quality, visible gaps between some parts (minor but noticeable), and a little frustration. As I graded this project, I tried to keep in mind that this was a project that cost me under $1,000 for a complete 10x10 shed including shipping and additional materials to build the platform. Similar sheds were anywhere from $1000 - $3000+ for the shed alone. So to answer the question of is this the best bang for the buck? Absolutely. This shed was shipped in 4 boxes via FedEx. All boxes were a manageable size if you're relatively strong or had a helper. I think the largest box was just under 75 lbs. During unpacking, it was easy to check that you received all the parts (each box contained a packing sheet for verification). I laid all the parts out in the yard for quick and easy identification. There's only a few different types of screws to worry about and don't worry, there are extra screws and washers so don't panic when you lose a few (despite the gold screws and white washers seeming easy to spot in green grass, they are like freaking Houdini and disappear out of nowhere). Before you begin assembly, I can't stress this enough. Make sure you are building it on a PERFECTLY level and square platform or other form of foundation. When we built it, everything went together smoothly, the holes mostly lined up aside from where we may have bent something or had something a hair crooked, and the doors opened and closed with no binding. We realized it was crooked after building it and using a come-along, we straightened it up which knocked it ever-so-slightly out of level, which as I learned was just enough to make the doors bind (so I will be releveling my platform soon). During assembly, much of it can be done by one person but there are a couple spots that are absolutely crucial to use a helper with: 1.) When installing the sheet metal corners, they will fold right over if you don't have someone hanging onto them. Don't even attempt that step alone, trust me. 2.) You will want assistance with the upper rail installation as well just to help ensure they are all squared up during installation. 3.) I installed the gable ends alone so it can be done carefully with one person but if you aren't extremely careful, they will fold right over on you. You need to carefully set them into place and make sure you get probably 4 screws in spread out far enough before you let them go. If you do one screw and then let go to reposition or grab another screw, your piece is going to fall off and fold over. Best method is to have a helper assist so you aren't trying to carry everything and do it all at once. They're super light and it'll take 5 minutes with a helper. Assembling the center beam is a pain in the butt. Follow the directions carefully and where it says to leave the screws loose, leave them very loose, because you will be needing to slide part of the metal in-between it. On that note, when you get to the step of installing the center beam, if you didn't choose to wear the gloves during assembly, wear the gloves for that step. I ended up supergluing my finger when the piece of metal snapped into place and my finger was still in there. Don't be like me. When I did the roofing panels, this was where I ran into issues with the holes lining up. Keep your screws loose until you have EVERY hole lined up and then try to verify your sheets are perfectly straight otherwise they will get worse the further down the row you go. Follow the directions carefully so you can reach the center screws for the ridge cap. I installed the panels from the inside standing on a short ladder until I could no longer fit and then finished attaching them from the outside. The ridge cap will need to be bent pretty far to access the screws for the remaining panels once you reach that point. Just try to be a careful as you can. The rest of the installation (door assembly and installation) went pretty easy. I didn't install the plastic covers that went over the exposed screws from the roof panels. They're not exactly in an area anyone should ever be sticking their hands but if you think people will be reaching up there, install them. Those screws are sharp. 😂 Verify your doors close okay and adjust your latch if needed. Other tips... 1.) I used an impact driver (and pliers when applicable) to install all screws but when using the F1 screws, but don't torque them down. They strip super easy. Snug them. If using plastic washers, make sure they're just tight enough to give the washer a little squish so they're doing their job (sealing from rain). On that note, when it calls for washers, use them or your shed will leak. I have not had any rain yet to verify it's leak free even with the washers. 2.) The sheet metal parts are shrinkwrapped with plastic, I assume to prevent scratches. Good luck removing it. I removed it from the pieces where it was noticeable and left it alone if it wasn't too noticeable. You will spend at least a day just unwrapping parts if you try to unwrap it all. It does not come off easy at all. 3.) I'm not sure what idiot came up with the 2-3 hour assembly time, but I can tell you I am generally a jack of all trades and this was nothing at all out of the ordinary for me or my assistant (who assisted for approximately 4-6 hours). Not counting the shed platform assembly. I had around 12 hours in it, split up over 3-4 days. 4.) I would tape or add padding to the roof beams on the underside. They are sharp where spliced together and if you're any taller than about 5'8", you could slice your head on them if you step under that part. 5.) DON'T lean anything against the walls inside or out. While installing a ground anchor kit, my buddy leaned against the wall lightly with his hand and immediately put a dent in one of the ridges. We popped it right back out, but as easy as it dented, you don't want to lean on it at all. 6.) Almost forgot this one but it may be one of the most important tips... Patiowell has both a YouTube assembly video and then a playlist that actually focuses on step-by-step assembly. These videos were a tremendous help as the instructions sometimes lacked the detail needed to align the parts properly or which side to overlap, etc. In conclusion... Pros: Inexpensive, looks pretty good, assembly was fairly straightforward. No special skills or tools needed. Basically tape measure, level, Phillips screwdriver (or impact driver), pliers, and maybe a hammer to gently assist a few parts into place if you couldn't force them into place by hand. Cons: Sheet metal is a bit thin and flimsy, some visible gaps between areas you wouldn't expect to see through, plastic protector nearly impossible to remove, some exposed sharp edges on the finished product, took much longer to assemble than advertised, packaging caused product to incur minor damages, door latch hardware is a little on the cheap side. Hope this helps you make a decision. Overall, I would still recommend this to others looking for a decent shed on a tight budget. Update: I was cautious when installing the screws on the roof to make sure all screws had a plastic washer and were appropriately torqued to prevent leaks from loose or overtightened washers. I still ended up with a few leaks. I am going to have to find a way to sell them up before my floor rots out. Otherwise, the shed is still solid.

Bought this shed to store automotive stuff that I didnt want to clutter in my garage. I was actually impressed with the kit. Be advised the panels are flimsy, but once assembled it's pretty solid built. Im not saying bullet proof, but for $100-120 cant beat the price. Definitely get help in beginning to hold the panels so they dont bed or crease. The pad i poured was 40"×40" and had about 1" edge all around. Will need to provide your own foundation and anchoring hardware. Don't tighten screws all the way until assembly is done. The holes will line up better. My only complaint was the white roof edge is flimsy, I ended up adding a few screws in middle where also the roof sheets over lapped to hold better. Instructions were ok, some inaccuracies such as missing pictures of washers and such but overall understandable and got it done. Installation took about 1 hr or so. Biggest con is peeling the plastic covering. But I understand why so it protects the paint.

Very thin metal on side panels and top panels a Little thicker. Gonna keep it but wouldn't buy another. Price good