XPC High Performance 20W/mK Thermal Pad T20 Series, 100 x 100mm, White, 0.5mm to 3.5mm Thickness, Non-Conductive for GPU, Electronics, Computer Parts (0.75mm)

Huge benefit in throttling and heat dissipation. I would advise being dumb and using this type of material on anything other than IC chip and mosfets. I REPEAT - DONT BE DUMB AND USE THESE ON THE GPU OR CPU.

I used it to upgrade the memory pads on my RTX 3090. So much better than the factory pads. At least 5C temp improvement just from this.

soft easy to cut squishy not much bounce back so probably a one time use pad but my temps are better than the stock pads on my xfx 6800xt merc 319 gpu overclocked with the adrelalin software from amd and more power tools

Great thermal pads for the price

There aren't all that many really thick thermal pads available, so I really wanted this one to work.Unfortunately, the pad I received is no good. Similarly to what other buyers have reported in the past, this product has dried out, which makes it feel in your fingers like a stale chalk -- and you don't want your fresh-out-of-the-package thermal pad to be "crumbly".

My temps on memory on 4080 before were sitting at around 70c. After they are now sitting at around. 60-65c. I would say that is a reasonable uplift. Would recommend.

I purchased to use on an M.2 drive, because it’s practically the only one available in this particular thickness. But came in super handy, I replace the pads on an additional two Raspberry Pi’s, and still have left over.

I used these pads to replace the stock pads on my GPU. One pack was enough for both the front and back vram. The vram temps used to hit 110°C while gaming. Now it stays 80-90°C range which is satisfactory for me. Use the 2.00mm pad for this particular Zotac gpu. My GPU no longer ramps up the fan speed randomly due to thermal throttling.*EDIT*The temps I listed are with my fans speed at 77% due to the cooling to noise factor. I'm sure if I ramped up my fan speed it would be a couple degrees cooler.