NYLL 3 ft T8 G13 Type A Plug & Play LED Tube, Soft White (3000K) Direct Replacement for 30W F30T8/SW, F30T12/SPX30, F30T12/SP, F30W/830, F30W/730 (Without Rewiring or Modification) Ballast Required!

It works without any changes to my existing fixture. In addition, it throws out a lot more light.

My work shop has a single neon tube , 36" ballast which has been in the shop since I moved in the house 27 years ago.Never threw off much light so about 4 years ago I replaced the bulb with a modern neon gas "bright white" bulb. An improvement but still not enough light. I would usually end up working with an additional "flexible light" or holding a flashlight in my mouth. Ordered this LED in DAYLIGHT 6000K and its a direct replacement. No wiring additional parts as other LED bulbs require, just twist it in! When I turned on the light all I could say was WOW! No more flex light or flashlight in my mouth. This one LED bulb lights up the entire shop like theres no roof during a sunny day.The light is pure white and slightly soft. Doesnt hurt your eyes and no silly blue tint. Absolutely amazing! I wish this LED existed 27 years ago!

Wow simply amazing the difference between the old 30 watt florescent and this bulb! Just in the light output and brilliance of white light that's emitted off this bulb running. Runs a lot cooler then the older florescent bulb not giving off much heat at all, and just the fact I'm saving half the cost it takes to energize this one over the other is a big saving! No rewiring like other Led bulb replacements either (just plug in and play) easy peazy! Used as a cabinet light. Thanks again to New York LED Luminaries!

I ordered two LED lights. When we removed them from the box, the first thing we noticed was that one of them was making a sound as if something were loose. In image 1, you can see that the black component is loose. We checked the other one from both sides and found nothing loose. Despite this, we decided to give it a try, but it still didn't work, as shown in image 2. Taking out the second one, assuming it would be in better condition, we found that it was bent, as seen in image 3. Nevertheless, we still attempted to use it, as shown in image 4, but it also didn't work. I am extremely unsatisfied with this product!

Worked perfectly with no rewiring. Easy to install, fit was very good, true daylight lamps are very bright, perfect for m under desk lamp.

This 36” T8 LED light tube fit and works perfectly in my existing fluorescent T12 fixture requiring no modifications. The light provided is well balanced (not too warm, not too blue-white) and the tube is noise free.36” LED Plug & Play light tubes are hard to find in the big box stores.....and, I’m happy I found this one that fit my needs!

I used the luminaires to replace the existing ones in an old pool table light that had odd sockets and can't be retrofitted easily. They work well with the existing ballast with no flickering and were as simple as a bulb change. The 5K temperature really lit the table well. I just wish they had been a little more economical.

I used these 3’ LED tubes to replace 2 traditional fluorescent tubes in an open residential living area. The fixtures direct light to the ceiling to reflect down into the room.They were a breeze to install, a true drop-in replacement, exactly like changing a light bulb.I’m very happy with the brightness and color. I can’t comment yet on longevity, but I’m looking forward to a long life from them.