Designed for protection of engine parts against wear and restoring repair of gasoline engines without disassembling. For treatment process is necessary to use up to 3 tubes by 9ml each (please see information about application and dosage below). XADO Gel-Revitalizant for gasoline engines has been certified by TUV. The gel forms a new cermet coating on friction surfaces (the parts grow in volume, restore their original geometry). As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times longer. Application: Treatment of the engine with the oil system 3-10 liters. Step 1: Squeeze out the contents of one tube into the oil mouth of the engine warmed up to the running temperature. Start the engine and let it idle for 5-10 minutes. Step 2: Do as described in Step 1 after 60-150 miles of run Step 3: Do as described in Step 2 after 60-150 miles of run Dosage: Oil system volume, L: 3-10 L, necessary quantity of tubes (9 ml) - 3 tubes, treatment scheme: 1+1+1, tubes for new engines - 2 pcs. Oil system volume, L: 11-20 L, necessary quantity of tubes (9 ml) - 6 tubes, treatment scheme: 2+2+2, tubes for new engines - 4 pcs. Oil system volume, L: 21-30 L, necessary quantity of tubes - 9 tubes, treatment scheme: 3+3+3, tubes for new engines - 6 pcs. Note: * Do not change oil until the end of the treatment! * Revitalization is considered to be completed after 1500 km run. * Treatment can be done at idling (4 hours are equivalent to 120 miles run); * New engines should be treated in one step - 2 tubes at one time. * The protective cermet coating forms on any operative mechanism; in case the mechanism (engine) is in critical state (wear 100%) worn parts must be replaced. Technical characteristics: General characteristics of the cermet layer: Microhardness - 750 kg/mm2; high corrosion resistance; roughness Ra up to 0,06 mkm.
Trustpilot
1 week ago
2 weeks ago
