CR-Silk Filament 1.75 mm, PLA 3D Printing Filament, Toughness No Breakage No Tangle, Smooth Silk Texture, 1kg(2.2lbs)/Spool for All Creality FDM Printers (Wood)

Crealitys wood PLA caught me off guard. It worked great. I tested it on my Bambu Lab P1S. Prints came out clean as anything. No clogs happened. Stringing stayed away. Layer lines looked spot on. Texture feels real. Like actual wood. Not some shiny plastic knockoff. Finish is matte mostly. Grainy just enough. Sells the whole idea pretty well. Nozzle hit around 200 degrees C. Bed stayed at 60 degrees C. Adhesion stuck fine. Warping did not show up. Get a hardened steel nozzle though. Or one that resists wear. Wood filament chews brass ones quick. You know how that goes. Sanded it light after printing. Added a clear coat fast. Thing looked carved for real. Printing was simple. No real tuning needed. End result turns out nice. Worth grabbing if wood vibe is what you after. Without all the usual mess.

I originally bought this for my daughter to use with her 3D pen because I thought a wood filament would be fun for her to try. I ended up loving it so much that I bought a roll for my own 3D printer once I got one. (She accidentally broke the plastic roll, so it wouldn’t work in my CFS, otherwise I would’ve used hers!) The color is great, the diameter is consistent, and I haven’t had any printing issues with it. We did try running it through a Toybox printer, and that machine definitely did not like the wood filament. But overall, the quality is fantastic. Pros: Really looks like wood Cons: Not compatible with every printer — check yours first

When I got this filament, it was already very brittle, presumably from high water content. So, I put it in my filament dryer and ran multiple cycles. The first small print after drying was decent, the second destroyed the hot end of my printer after only a couple layers. The whole heating chamber was full of PLA and the filament was still so brittle that it could not be removed without snapping off and getting stuck in the Bowden tube. I had to replace the whole hot end as a result. When everything was replaced and repaired, I tried printing again only to find that the filament was again so brittle that several rounds of drying could not fix it. When in the printer, it just oozed out of the heated nozzle (even at minimal temperatures for printing) and would not adhere to the plate (even after releveling and optimizing the Z-offset). A waste of money that ended up costing me even more money.

Somewhat brittle and does not really give the wood grain look on the prints I used it on. Printed just fine, just as good as the other Creality filaments. Color matches the pictures on the listing.

I really like this filament. So far, no issues using it on my Creality K1C with a diamonback nozzle.