Model:SH-U09C

Worked perfectly with no driver issues

This is a well designed unit at a remarkable low price for what it does. The material quality is top rate. Very convenient item for interfacing a USB port to a serial port. I simply plug it into a USB port on my laptop and use the provided cable to connect the interface unit to the serial interface pins of my microcontroller board. The use of clear plastic to encase the unit is very smart. It allows you to view the LEDs monitoring the Rx and Tx lines to ensure data is transferring properly. Makes programming the microprocessor easy, using the software on my Windows 10 computer. Installing the Win 10 driver was also easy by downloading it from the FTDI website. It also provides the use of 3.3 volt or 5 volt logic by use of a simple jumper on the unit. They also provide a jumper for loop back testing. Highly recommend it.

I needed this to program a Nextron LCD display via a USB port. At first, my Nextron screen showed only lines and static. Then I realized the power jumper was set to 3 volts, and the Nextron required 5 volts. After that, no problems. It just works.

Bought it to flash some receivers for my hobby. Worked like a charm, so far no issues, easily readable by computer and cost isn't that bad. Simple design that works,

The FTDI drivers are flawless unlike the CP2102 drivers which are old and outdated. Save yourself the headache and trouble and pay 5 more dollars for the FTDI chips, you will thank yourself in the future. The variable voltage selection jumper on this converter is very useful for handling hardware that runs on 3.3V instead of 5V, saving yourself the hassle of buying, owning, and subsequently finding the right voltage TTL reader. The jumpers included on this were also nice. Great value, would buy again, would recommend to anyone looking for a TTL reader. Use case: Reading serial terminal data off an SBC due to bugged OS compilation software (a lot of bootleg, or alternative rpi clones do not have reliable wifi config options when compiling and writing the software to the boot media. Often, these have no video output, so doing any computing becomes impossible. You need one of these to change the settings on the OS after initial boot to connect to your network to SSH into them).

I bought this adapter to interface a uBlox Neo-8M GPS module to use as a time reference with PPS to create a stratum 1 NTP server on Windows 10. It powers the GPS with no problem. I soldered a lead to the CD (carrier detect) hole on the PCB and connected it to the PPS output of the GPS module. It works, but be careful. It appears that the RS-232 control signals (CD, CTS, RTS, DTR, DSR, etc) are inverted. So my PPS driver was triggering on the falling edge of the CD signal instead of the leading edge. I was able to compensate for this by using an offset.

Plug and play on Windows 11, no additional drivers required. Used flashmagic tool and instructions I found online to put the T962A into bootloader mode then flashed like a champ. Likely won’t have to ever use it again but good quality for peace of mind.

This is not strong enough to put my ESP 32 into boot mode by itself. Returning

Propre parce que le boitier protège bien la clé et permet de la manipuler sans problème. Fiable parce qu'elle a fonctionné tout de suite sans avoir besoin de drivers (sous MacOS/Unix en mode terminal). Enfin, au niveau des plus : - Elle est livrée avec un câble de raccordement des pins (femelle-femelle), Que je n'ai pas utilisé car j'avais besoin de mâle-femelle, mais j'étais déjà équipé. - La puissance de sortie est suffisante pour alimenter/flasher un module ESP8266 (Shelly à rendre compatible Homekit). Pour le moment, j'en suis très content.

Funciona correctamente, y está muy bien al estar encerrado en caja metraquilato (o similar). Tiene jumper para selecciona salida de voltaje a 3,3v o 5 v dependiendo de lo que se vaya a conectar. Ha llegado perfecto y en el plazo indicado al realizar la compra.

l'Adattatore seriale da USB a TTL DSD TECH con chip FTDI FT232RL è un acquisto fortemente consigliato per hobbisti, ingegneri e sviluppatori. Offre una combinazione vincente di affidabilità, compatibilità universale e funzionalità pratiche che semplificano il debugging e la programmazione di sistemi embedded. È un piccolo strumento che fa esattamente ciò che promette, senza compromessi. Chip FTDI Originale e StabileVersatilità dei Livelli Logici La possibilità di passare facilmente tra livelli logici TTL da 5V, 3.3V e 1.8V Facilità d'Uso Plug and Play Indicatori LED Utili: La presenza di indicatori LED per TX (trasmissione), RX (ricezione) e alimentazione

Good Solution for Serial port converter, used to reset the Electronic devices. Thank you.

Honestly I havent used for some reason not related with product.