63CC 2 Stroke Post Hole Digger 3HP Gas Powered Earth Auger Borer Ground Drill Gasoline Earth Auger Wheelbarrow with 11" Bit, for Fence Ground Drill Garden Tree Planting (Orange)-[Arrives in two boxes]

As others have stated the assembly instructions are a challenge, after I got it assembled I couldn't find the recommended Vixen two cycle oil so I used Sthl two-cycle oil 25:1 mix. It started right up and I used an 8-in auger to drill 12 - 2 ft deep holes in heavy clay. Very easy and fast to use. Great value for the cost.

I was unable to work the machine. It comes shipped in two boxes. That’s fine, but if you need to return it, ask for two labels. The machine comes with a bag of tools that do not have all of the screws needed to put it together. It was an impossible task. The design to assemble is basic. It should have been easy. The problem is the screws are not just missing, they are not correct! I put together the dolly/carriage and when I got to the part where you mount the motor to the carriage, I could not mount it. I had another set of eyes undo it and them try to assemble it. They came to the same conclusion. The only way to assemble is to maybe order another set of screws altogether and use some of them to mount the motor. I can’t say what is after this step though. I contacted the seller. I asked for a refund and explained the problem. The seller sends one return label. Mind you it’s days in between to get a response. I find out there is an instruction video for the assembly. I look at the video and see that the screws in the video do not match the screws in the diagram! It’s an impossible task. You cannot order replacement screws. There is a problem with the manufacturer. The seller is slow to respond and it took too much time. They tried to tell me they were going to get screws from the manufacturer. My question is, what screws? I finally decided to contact Amazon to intervene. Then I was able to get the second return label. I DO NOT RECOMMEND this auger or the seller. They did not respond to the problem with any common sense. The quality is not good, and not worth the time or your money. If you are buying the design because you are a woman or maybe older, single, etc. Just do not bother.

Difficult to assemble.Drilled holes not well placed. Needed lots of clamps and 2 people to attach the motor to the handlebars. Works well. Started right up.

Had to deburr several bolt holes. Protective starter case cover broken & missing pieces (so you know it was broken long before shipping). The predicted (included in manual) clutch slippage during break in period was nothing. Bought/used a 6 & 8 inch auger. Haven't used the 11 that comes with. Just let the machine do the 'slicing' (also in manual) but had to insist a bit for awkward rocks. Have big 3 point auger for tractor but this just fits everywhere so much better. Storage is a little odd. Reminder: fuel mix is 25:1 not 50:1 (yes, I'm sure).

Junk, I'm a profession Carpenter/ Construction person have ran business since 1987 and this piece of crap had no instruction except picture so small you could barely see them'I'm in Pennsylvania and got this as a Christmas Present and just put it together 4/11/2025 parts were rust (Was inside.)Just hope it starts and works when I get it to try to run, I'm doubtful!

Awesome tool in my arsenal of yard power equipment. I ordered the additional larger auger bit for corner posts installation.

I purchased this equipment to plant 60 shrubs for a hedge, with a depth of 12”, in sandyFlorida soil. After making 15 holes, 2 bolts loosened from the left handle bracketssupporting the manifold to which both the motor and auger assembly are attached.Purchasing new bolts, reassembling the parts and checking the other connections Icontinued digging. After doing 16 more holes the motor suddenly separated totally from themanifold supporting it, leaving only the auger drive assembly attached. I did theremaining 29 holes by hand using a shovel. Bottom line, the equipment concept is goodbut some significant engineering changes are needed.

Just drilled 24 holes in between pine trees. It was hard and rocky too. Not much jerking me around with this wheel setup. Had to tighten nuts and bolt tho half way thru. Watch for that, you lose one if ya don't. It's a good buy better than renting. The bad is there is really no directions on how to put together you just really have to wing it. That said over all good buy.