






🌿 Drive Clean, Feel Elite — Because Your Air Deserves the Best
The ECOGARD XC36174 Cabin Air Filter is a high-efficiency MERV 14 filter designed to fit select Ford and Lincoln models from 2012 to 2022. It removes 99.5% of airborne contaminants including dust, pollen, and allergens, protecting your vehicle’s HVAC system and ensuring fresh, clean air inside your cabin. Engineered for perfect OE fit and easy installation, it’s the smart upgrade for drivers who demand premium air quality and system longevity.






| Manufacturer | Ecogard |
| Part Number | XC36174 |
| Item Weight | 3.2 ounces |
| Product Dimensions | 10.5 x 8.1 x 1.5 inches |
| Country of Origin | China |
| Item model number | XC36174 |
| Size | 8.1" x 10.5" x 1.5" |
| Style | XC36174 |
| Material | Paper |
| Item Package Quantity | 1 |
| Minimum Efficiency Reporting Values (MERV) | 14 |
| Included Components | Cabin Air Filter |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | Manufacturing Defects Only |
D**.
Fits 2014 Ford Escape, tricky to replace
Works just as great as the factory one, at a lower cost. The only trouble is that it's just as cumbersome to work with as the factory one.This has been by far the hardest Cabin Air filter replacement I have done. It's located under the passenger side footwell. First you'll need to unclip the two plastic clips holding the upper cover under the glove box (you'll know when you're there). Next you'll need a Torx T20 bit to undo 1 screw that holds the cover in place. That's the easy part.Once you take off the plastic cover the fun begins. For some reason Ford decided to put your fuse box and misc wires directly in front of the filter; not allowing the filter to be pulled straight out. Instead you'll have to pull, twist and squeeze the filter out. It might bend and crease but you don't care, you're just getting rid of it any way.However, once you try to get the new filter in is when you realize how terrible of a design it really is. There's no easy way in. Since you want to keep your filter as neat and damage-free as possible, you'll try a few times from different angles only to realize it ain't gonna happen. You'll even contemplate the idea that the dealer's charge of $90 didn't seem so bad after all. But fear not, just take a deep breath and try again. Only this time feel free to squeeze the sides together (to look like an hourglass) and that should shrink it enough to get through most of the clutter. Don't worry, this won't mess up the filter, it'll spring back into shape just fine. You'll bend and twist a little but, no where near enough to damage it. Once you get passed the wire and fusebox clutter it should accordion back into the holder just fine.Even thought it only took me around 15 minutes to do myself, I don't look forward to the next replacement. I'm sure by then I'll have forgotten the bad and only remember the good and place another order. But I'll let my future self worry about that.
E**D
installed on 2017 Ford Escape SE
I am a petite 71 yr old lady and had this filter installed, hands washed, and T20 wrench put away in less than 15 minutes. Many install videos show squishing the middle but that wouldn’t work with this since the top and bottom edges were fairly rigid. To get it in easier, I pushed down on the leading top and bottom edges and indented the leading middle edge just a little and it pushed right in. The size matched the OEM filter I took out. To help with the lighting under the dash, I used my handy headlamp so I could actually see what I was doing.
M**Y
Fits perfect SMELLS fabulous
This fits my 2013 Escape perfectly. Wasn't too rough installing. It smells fabulous
C**Y
Filter good, but came in crushed box
This filter was a great price and I could wait for delivery. Where I live it takes about a week instead of overnight or two days (like it did before Covid).I took off one star because it arrived in an oversized box that was super light, but smashed. It just so happens the damaged outer box aligned and damaged filter box inside. I was able to straighten out the filter enough to work.It was challenging to put in (car design challenge, not filter fault). That said, I was able to straighten out upper stiff support on filter to get it in place (which was my concern). It went in OK and replaced a factory installed filter that came with the car.My wife doesn't complain about the smell anymore. 🙂I would buy this again without hesitation.
J**S
Gets the job done
I don't really know much about this item but the hubby says it works well and he likes it.
S**Y
Quality factory fit aftermarket alternative.
Same size and fitment as the factory Motorcraft OEM filter. Pleats seem strong and fibers remained intact even after the filter was crushed, ripped out, and crushed again. Vehicle is a 2015 Ford Focus and the install is somewhat difficult on this model compared to every other cabin air filter I have had to install. You basically have to shove it in the air box from the passenger side foot well. Initially I shoved the filter in to far and had to remove it to reinstall it. While the filter did get a little dirty it did not rip and was still intact even after going rough such a rough ordeal. When installing please check to make sure it lines up with the corners of the duct so that unfiltered air does not bypass the filer. All in all I like the filter for the money and will probably buy one again when the time comes.
L**T
Great fit for my Ford Escape
Product was as described. Fit my 2015 Ford Escape just perfectly.
C**A
Fits 2017 Ford Escape!
I bought my car with 11,000 miles and it's now at 40,000 and I've never had the air cabin filter changed. I think it's something people just don't know about? I changed it myself and this was a perfect match, and well needed. Price was half of the nearby stores!
Trustpilot
1 week ago
1 month ago