LINKUP 12VHPWR PSU-GPU Power Cable | Compatible with NIVIDA RTX 5080/5070 and All RTX GPUs | 600W 16Pin/12+4 PCIe 5.0 Cable | 70cm - Right Angle

This is for: LINKUP AVA Right Angle 600W PCIE 5.0 12VHPWR cable (male to male). I am using a Seasonic Vertex ATX 3.0 1200W PSU which originally provided a male to male 12VHPWR with both ends straight (180 degrees). This worked but as one attached image shows, at the RTX 4090 GPU end of cable, the straight connector was a bit too protuding and close to the case side cover (partly on account of other cables/coolant hoses). The cable under review has corrected this problem most adequately. I have attached images showing how the new cable helps. The connectors with the cable seem very good, they mated with the PSU and GPU very securely without wobble. Others have reported power limiting issues but in my circumstances, this didn't happen. If anything the cable seems to seems to support more GPU power draw. I have a watt meter on the system inlet power and with this cable, the OCCT power stress test max system draw increased from about 1050W to about 1100W, or about a 50W delta. So at the very least, this cable does not limt the GPU power-wise When I got the cable the first thing I did was to verify that it's wired the same as the original (using an ohm/continuity checker) and found that it matches. The cable length on my sample was about 70CM as spec'd and includes cable combs and tie-wraps. I would have preferred a 50CM cable length but this one is 5cm shorter than the Seasonic original cable so while th new cable is not exactly as desired, it is still easier to cable manage in the case. The cable seems to come only in black but that is what I wanted. I could have gotten this cable from Cable Mod in my exact cable length but it would have been more expensive and taken a lot longer to recieve. I also could have used a right angle extension but that would have added an additional connector in the path and would have also resulted in more even more overall cable length. Note that the right angle GPU connector has two orientaions, "a" and "b". Be sure to the get the oreientation that matches your needs. In summary, I recommend this cable for circumstances similar to mine: a Seasonic Vertex ATX 3.0 PSU, an RTX 4090 and a Corsair 5000D Airflow case where the cable is more than long enough. The only caveat is that if you use it with a different model of PSU, you should check to be sure that the new cable pinout matches the prior cable pinout.

Update: it's been a few weeks, with some hardcore gaming, no smoke, no fires, no failed boots, no shut downs, it's solid, nice not to have to use og cables and extension.. So I have a modular gigabyte ud850gm pg5 PSU, I know that you can't use cables from other PSUs with it, because they are all pinned differently. I looked for hours on videos (jay2cents and others) and tons of sites to see if there is a standard for 12vhpwr cables on modular PSUs and found nothing..But for some stupid reason I decided to use this 12vhpwr cable that says it's designed to go from the PSU to the GPU (not an extension), I even asked the question, can it really go straight into the GPU and be used on my specific PSU.. Well it looks great, stiff as hell (which is good at the connections), and it has yet to burn up my PC or even shut it down. I ran heaven to push it and there was no smoke, I put my fingers around both ends of the connections to see if I could feel excessive heat, I didn't. So though it was stupid to even chance it, it works as of maybe 20 min ago, I'll play some diabloIV tonight and see if that produces any smoke, I'm still pessimistic that it's okay.. If I don't run into any issues, LINKUP is a quality squared company that I will tell others about, I'll give a well done and bump it up a star in couple days or so..

Fixed my 4070 ti super random crashing. Before buying this cable I tried everything to stop the random black screen crashes from replacing my mobo to updating drivers and everything in between. But nope I needed a new power cable. Been playing for a week and haven’t seen a crash since. If your gpu is random black screening give this a try

DO NOT BUY The cable I received had a defect out of the box of the plug being slightly bent upwards of the right angle advertised with stress marks visible on the plastic. Needless to say with how problematic this socket has been I would not risk using this.

I got this open box for a pretty good price so took a chance on it. Came with the cable combs already on it. I assume it was used and returned by someone. Cable works fine on my liquid cooled and pretty heavily overclocked RTX 4080 running at 340w under load. I really like the angled connector on the the GPU end (show in pic). It makes for a clean look. No more ugly splitter that comes with the GPU. If you have a newer PSU with the 16pin this kind of cable is the way to go. So much less clutter. The cable materials are fine. Its a little on the stiff side but nothing that you can't work with. It needs a couple more cable combs given its length and stiffness but again, not a huge deal. You only see maybe 3-4 of them anyway. Solid 4/5 stars. Good enough for the money if it lasts and doesn't fry my GPU.

Mine is plugged directly into a FSP Hydro PTM 1200w ATX 3.0 PSU with a Strix 4090 on the other side. Works perfectly and looks better than the cable that comes with the PSU.

Super easy to install - this cable has easily stood up to me checking each end of the connector for any damage/melting, so far so good, almost 5 months later with an RTX 4090 Would buy again from this manufacturer

Plastic around the connector is so bulky it required some trimming for it to fit in my 3080FE. Connector couldn’t make it past the radiator fins next to the plug. Good news is despite that nothing has caught fire yet.

タイトルにある通り、H++表記は見受けられませんでしたが 素材の表記「は」しっかりしており、コネクタとワイヤーの遊びを徹底して防いでくれる…モールド？ が付与されてある為にケーブルの曲げ等にはかなり強いんじゃないかと思いこちらを購入し変更 実際、かなり安定して電力供給してくれていると思います。 12vの電圧低下が更に減りました(純正/Fasgear製と比較)。 で、お決まりのパターンなんですがセンスピンが画像だと2本しか無いように見受けられましたが 実際の製品にはキチンと4本ついており、16ピン完備でした。好い加減画像変えろよどこのメーカーもｗｗ 上記の理由から当製品はPCIe5.0/ATX3.0準拠でも抜きんでて安全…なハズです。 しかし…調べても16AWG UL1571の詳細が出て来ない… キチンとスペック表出してくれませんか？ そうすればもっと買いに来る人増えると思うんですけどね。

المنتج جاني مختلف واتلاك نحيفة مررة

This has lasted through a 4090 and now 5090 with no signs of fraying or melting and is a good length to neatly hide in the case. The cable quality is on point and feels sturdy. Using with a 1000w power supply - no issues whatsoever.

Perfetto per la mia RTX 4090. Il cavo in dotazione alla scheda non permetteva di chiudere il case essendo poco pieghevole e rigido. Questo cavo invece essendo a L permette di chiudere il case senza problemi.

Exactly the cable I needed to hook my Nvidia 4070 Super to my existing power supply. Great product!