ENEACRO Polisher, Rotary Car Buffer Polisher Waxer, 1600W 7-inch/6-inch Variable Speed 1500-3500RPM, Detachable Handle Suitable for Boat,Car Polishing and Waxing

I polished granite with this ENEACRO Polisher. While the diamond polishing pads (purchased elsewhere) I used with the polisher did NOT work satisfactorily, the polisher worked long and hard attempting to attain the sheen the pads were supposed to produce. The speed range, while advertising 6 speeds, is a continuous rheostatic thumb wheel without detents. It provides the range most needed for polishing just about anything. I did not push hard attempting to make the tool work harder since better results are attained letting the bit, paper, pad, compound, whatever you're using do the work at the right pace. Doing that, the polisher did not heat the motor unnecessarily. Over three days I used the polisher a total of about 16 hours on and off to rest my arthritic hands which also allowed the gear box to remain at a proper temperature (not get too hot) as with any tool that has one: like random orbit sanders, 4.5" grinders, jigsaws, etc. The standard 5/8"-11 shaft means most any backer wheel/pad will fit it. The assortment of included pads/bonnets will come in handy if I ever wax & polish my car. But I purchased it to remove hard water fogging around our kitchen sink and polish our kitchen granite counter tops - and it did a great job of that. Off subject: for others trying to remove soap and water mineral buildup on granite around your sink (we have black galaxy granite)--- don't do what I did... using too coarse a grit to remove the whitish mineral "fog." I started with 320 grit wet and dry silicone carbide paper because that grit works great to remove toilet hard water rings without damaging the porcelain glaze. I should have just started with 3000 grit and ended with 6000 s.c. paper or diamond, then resealed. I made a lot of unnecessary work for myself starting with 320 because you have to go through all the intermediate grits to get back to the 3 or 6000 ending point: 300,600,800,1200,1500,3000,6000. Some will skip the 1200. Hope that helps. Great tool. I'd recommend it for homeowner/handyman use.

Strong and works perfectly

Firstly, this is good bang for your buck. If you’re simply polishing it’s great. It’s light, has a nice long power cord and includes the hoop handle overhead. Personally I like hoop handles. Less hand strain and still offers good control. I did a full wet sanding job (entire vehicle). Block wet sand, compound & polish on this machine (3M pads, compound & polish) If your going to be doing wet sanding work then you will need to be more patient in the cutting compound application. It bogs down fairly easy with your pressure. Good for rpm control but at the cost of consistent pressure. Regardless, still did the job fine with additional passes to compensate. If/when the compound gets a little tacky or the pad clogged it bogs heavily. Keep the compound wet & clean the pad more often. The head also gets hot so you wont holding that on large jobs. Overall it’s good and I recommend it for weekend warriors. I will keep it as a polisher & back up tool. The head gets hot so you wont be holding that for Hot, loud, boggs

This polisher took my chalky white boat that I’ve neglected for over 5 years in the South Florida sun into a shiny new boat. Coupled with a good cutting compound, it made super quick work of my boat. Take a look at the reflection of my dock in the picture - this polisher works great! I never thought it could be this easy. This Eneacro polisher, combined with a good cutting compound allowed me to polish a 32' boat above the rubrail in just a few hours. I detailer wanted to charge me over $3200?!? Buy this polisher and do it yourself and save big buxxxx!

My husband and I are professional detailers on the weekends , as a side hustle .. We have taken on quite a few more clients recently , and wanted to upgrade our polisher to accommodate. We have used many different polishers over the past few years.. and This machine is just as durable as the leading brands. And The packaging was impressive, neat and professional looking, as I pulled it out of the box. This polisher exceeded my expectations in durability and speed. The results were astonishing., and for a fraction of the price, that I have paid in the past, on other similar models. I rarely take a chance on an off brand products when it comes to my business, however, I am happy I did, save the money. I have had this for 2 weeks now and no issues whatsoever. It’s Lightweight and very easy to use. Extremely user-friendly I was able to figure it out right out of the box.. The polishers are easy to replace and are standard size, I was able to use pads that I have had left over from other machines, and they worked just fine with it.. overall extremely impressed, surpassed my expectations and more!! this was an amazing buy, an amazing value! Highly recommended!

I read a lot of complaints about this being too fast for car use, not an issue at all! Has variable speeds from 1 to 6, with 1 being so slow you can stop the spin with a little pressure. I used it to restore some shine to my old pickup, lots of scratches, and I was able to make it look good again without doing any damage. Very easy to use, set a slower, comfortable speed, and have fun. I cleaned the vehicle, used a mild cleaning compound to remove fine scratches and oxidation (at low speeds with light pressure), then coated with polish and buffed until shiny. I used the polisher for a good 5 hours and it never overheated, bogged down, or had any issues. Well worth the cost for me, and I love that it comes with 2 different hook and loop type heads. You will be able to find replacement pads and polishing covers just about anywhere in the 6 and 7 inch sizes. I would buy this for a friend and gift it!

After I messaged customer service they offered to replace my broken item so I am altering my review. Original review below. I have had two of these and they both broke within a couple months. I have tired messaging the company and they have not responded to fix the problem. Crap tool and poor customer service. Spend your money elsewhere.

• SUMMARY This is an excellent entry level polisher for anyone wanting to learn paint enhancement and basic correction, or the mobile detailer on a budget that wants to add a compact polisher to their arsenal. It's lightweight, relatively quiet, well balanced, with minimal vibration. (Quite surprised actually!) The build and material quality all feel robust and machining/casting throughout is good quality. The on/off switch is a little janky, but useable. The speed dial, located on the rear of the unit (by the on/off switch would be better) is a continuous rotation rather than a click sensitive dial to confirm the setting you've selected; which is more subjective and more of a preference rather than a pro/con feature. The 10 ft. cord is adequate over the shoulder, but you'll want to make sure your extension connection is secured to avoid disconnecting. The platypus head grip is comfortable, made of hard plastic. Rubber would be better but you have to remember you aren't paying for for a high-end tool, so don't expect high-end finishes. • GREASE I would suggest swapping the gear grease to a higher quality red grease like MYSTIK JT-6. The process is pretty simple (Look for "DA Polisher Grease Change" on Youtube) There are plenty of step-by-step tutorials. • PADS The pads are "ok." We'll see how long they last. The pads are also not marked or any indication provided as to their intended stage. Most pad manufacturers follow a "standard" color code (if "standard" even applies ot the auto detailing world, lol), but you never know with less known brands like this. In either case, I would recommend upgrading to Lake Country, HEX Logic, or similar for better quality pads. • BACKING PLATE You can also throw a 5" backing plate on this unit to reduce vibration even more. It's also compact enough you could put a 3" backing plate and pads on, for tighter areas and headlights/taillights. • THROW Keep in mind this has about an 8mm throw, so you'll need to be patient, as you won't cover as much surface area as quickly as a 15mm or 21mm throw. • OVERALL With the right pad & compound/polish combo, this little unit does an excellent job for the money.