WOWLED 10-Pack 4 Pin 10mm L-Shape Strip Light Connector Clip, Right Angle Corner Connector for 5050 3528 RGB Strips Light 90 Degree Joint Solderless Adapters DC

I was daisychaning LED's to go into separate shelves, and this worked perfectly. My product was exactly as in the picture (saw other reviews say it was different) I would just say that since the wires are so fine, stripping the cable is quite difficult without damaging the wire.I was also separating the cables into individual pieces, which generally required me to do a little cut at the join and then just pull them apart.Overall it did what I wanted it to do and all my connected LED lights work!

Does the job really well once you get ‘the knack” of how to do it. First couple of tries didn’t work but got the hang of it. If daisy-chaining, remember that the voltage will drop the more length you have, so if you’re meeting up, as I was (around the perimeter of a room), with another end of led lights in a circular pattern, you might have a noticeably dimmer light by the end, next to a bright light at the beginning. Nothing directly caused by the connectors though, which are great.

Nice easy to fit connectors for joining lengths of led lights.Two cables needed for each join.Use some electrical tape to strengthen the black connectors between the two cables.The pins in the white connectors can be bent up SLIGHTLY if the strip lights don't slide in easily. They will push back down and hold well once cover is closed on connection.Used for 4 pin led strip.Negative was that they were a little short for my application but I could extend the wires by cutting into one end and adding 10inch of wire bought separately to give me enough length between strips.Make sure and follow the correct wiring path because if you cross it over obviously the polarity will be off and your extended strips won't function!

Used on some individually addressable LED strip around the TV. Easy to use and look the part

Very reasonably priced for the length however the core is extremely thin, which makes it easier to solder to LEDs however the connections don't stay that strong due to the thinnest of the core of the cable. As I was putting up the LEDs, couple of connections broke because of the thinnest of the wires and I had to redo all the soldering. I have previously had wires with much better thickness hence my experience with these isn't overly satisfying.

product works really well, must be careful to match RGB when connecting, lights flicker when you move them but stay solid when still. Very easy to use, just slide the strips in and push the clasp and your done, amazing!

The colours don't follow the regular rgb however the cable is nice and neat to solder. I would recommend using this and soldering rather than the temperamental 4 pin connectors and for the price you can go wrong

You are correct to be suspicious of these little things. Let me tell you, I don't leave reviews unless some time has passed. After 6 months, these connections have slowly lost their reliability so some sections and the subsequent sections flicker and lose one channel like blue. You can fiddle with them or move them and it's just faulty.SOLUTION: you can loop the strip on the corner instead and avoid this problem. See image attached.They are not precisely made, the plastic distorts and does not quite line up by sometimes a millimeter.You may think a attention and care would solve this, but this started since I installed them and did just that, trying to fix it and line it up. There are little copper strips for each of the four channels that connect with the led strip, and each of these little copper strips have a small bulge on them, so when you snap this thing onto the led strip, connection is pressed. These bugles are not all equally pressed in, some are shallow. So I evened them up with a small screwdriver, but even that does not help because then the snap onto the led strip gets too tight.