Can i go from speaker out on my amp to get a line level signal to go into an audio interface? like for recording an amp without a line out?

Yes! Ignore the other replies. From the product description and according to the user manual this product will allow you to connect directly to the speaker terminals of your amplifier. But do not disconnect the speaker from the amp, drive both the speaker and this DI at the same time or you could damage your amplifier. Also, I would be sure to attenuate the signal on the input panel of the UltraDI before connecting it to the speaker terminals. The manual recommends enabling the ground lift switch as well.

I play a Strat into a Hot Rod Deluxe. i'd like to get rid of the hum. should i put this between the all-analog pedal board and the amp?

Don't think that will do it. Hum is caused by single coil pickups on your Strat (if it's this the hum will go away when you turn your guitar down or a ground loop between your amp and pedal board ( only if it's AC powered). There is a box made by Ebtech called a Hum Eliminator that lifts the ground on one of your audio cables. This might work if it's a ground loop

Does it work without a battery inside

No. Works with a empty battery conected, using the phantom switch on in a Behringer console, but doesn't work without a battery inside

Can you use this to connect a computer to, and then hookit to the mixer?

There are other DI's specifically for computers that would work a lot better for that purpose.While the DI-100 isn't designed for that, you could still find a way to do that.

Special features	With the DI100, you can rest assured that your sound source will reach your console balanced and noise-free. Go ahead and plug that guitar amp’s speaker output into the ULTRA-DI, it will deal with ratings of up to 3,000 watts and give you a perfect signal at the other end. The input-buffering amplifier ensures clean, pure and powerful sound, even with extremely long cables.
Compatible devices	Amplifiers, Mixers, Guitar Amps, Speakers, Microphones, Musical Instruments
Colour	Silver
Included components	ULTRA DI DI100 Professional Battery
Polar pattern	Unidirectional
Audio sensitivity	50 Decibels
Item weight	750 g
Impedance	250 Kiloohms
Microphone form factor	Handheld
Item dimensions L x W x H	15.8 x 13.6 x 7.2 centimeters
Power source	Battery Powered and Corded Electric
Number of batteries	1 9V batteries required.
Material	Composite
Signal-to-noise ratio	110 dB
Number of channels	1
Frequency response	10 KHz
Global Trade Identification Number	04033653100168
Manufacturer	Behringer USA
UPC	713757154413
Item Weight	750 g
Product Dimensions	15.8 x 13.6 x 7.2 cm; 750 g
Batteries	1 9V batteries required.
Item model number	DI100
Body Material	Composite
Color Name	Silver
Guitar Pickup Configuration	Combination
Speaker Amplification Type	active
String Gauge	Custom
String Material	Nickel
Top Material	Aluminium
Number of Strings	10
Guitar Bridge System	Adjustable
Material Type	Composite
Country Produced In	china
Wattage	3000 watts

BehringerUltra DI DI100 Professional Battery/Phantom Powered DI Box, Silver

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions